Welcome to our new site. We hope you enjoy it. We are in our final testing to make sure everything is ready for you to come and SHOP. Look around all you like, we'll be officially open over here 12/26/24!
24" Rolling pin: Rolling surface width is 16-3/4" and diameter is 3" 30" Rolling pin: Rolling surface width is 22-1/2" and diameter is 3" Rolling pin is solid hardwood - no bearings to get clogged by clay.
These tools are used by potters and sculptors for medium duty clay cutting, shaping, and slicing. These 8" ribbon tools have cutting ends formed from high-strength sharpened stainless steel that are firmly attached to hardwood handles.
Used for smoothing, shaping and finishing pottery pieces. Molded from pliable rubber. We offer them in two kidney shapes and dif- ferent grades of resiliency. FRH = Hard 4-14" FRSM = Hard 3-1/8" FRSO = Soft 4-1/4" FRSS = Soft 3-1/8"
MRL Mini Rollers have a rolling design face that is 1.0 cm (0.4 inch) across. MKM Mini Rollers are beautifully carved, have unique designs, release well, and have a smooth carved texture. MRL Mini Rollers are made from wood and finished with tung oil to ensure durability for many years of use. The Mini Rollers are easily cleaned with water and a soft toothbrush. All MKM MRL Mini Rollers are best rolled with the RH-2 Handle. The RH-2 splits apart to facilitate inserting a different MRL Roller. One RH-2 is all you need to use for any MRS, MRL, or MRX roller. The RH-2 and MRL Rollers are sold separately.
MRL Mini Rollers have a rolling design face that is 1.0 cm (0.4 inch) across. MKM Mini Rollers are beautifully carved, have unique designs, release well, and have a smooth carved texture. MRL Mini Rollers are made from wood and finished with tung oil to ensure durability for many years of use. The Mini Rollers are easily cleaned with water and a soft toothbrush. All MKM MRL Mini Rollers are best rolled with the RH-2 Handle. The RH-2 splits apart to facilitate inserting a different MRL Roller. One RH-2 is all you need to use for any MRS, MRL, or MRX roller. The RH-2 and MRL Rollers are sold separately.
Used for smoothing, shaping and finishing pottery pieces. Molded from pliable rubber. We offer them in two kidney shapes and dif- ferent grades of resiliency. FRH = Hard 4-14" FRSM = Hard 3-1/8" FRSO = Soft 4-1/4" FRSS = Soft 3-1/8"
This special teardrop shaped foot, flat on the bottom, is perfect for pressing lace in place, in addition to the fine, sharp needle for placement. The foot is stainless steel with a hardwood handle for a total length of 6-3/4".
MRL Mini Rollers have a rolling design face that is 1.0 cm (0.4 inch) across. MKM Mini Rollers are beautifully carved, have unique designs, release well, and have a smooth carved texture. MRL Mini Rollers are made from wood and finished with tung oil to ensure durability for many years of use. The Mini Rollers are easily cleaned with water and a soft toothbrush. All MKM MRL Mini Rollers are best rolled with the RH-2 Handle. The RH-2 splits apart to facilitate inserting a different MRL Roller. One RH-2 is all you need to use for any MRS, MRL, or MRX roller. The RH-2 and MRL Rollers are sold separately.
Used for smoothing, shaping and finishing pottery pieces. Molded from pliable rubber. We offer them in two kidney shapes and dif- ferent grades of resiliency. FRH = Hard 4-14" FRSM = Hard 3-1/8" FRSO = Soft 4-1/4" FRSS = Soft 3-1/8"
This heavy blunt needle for placement of the lace as well as a special teardrop shaped foot, flat on the bottom for pressing lace in place. The foot is stainless steel with a hardwood handle for a total length of 6-3/4"
MRL Mini Rollers have a rolling design face that is 1.0 cm (0.4 inch) across. MKM Mini Rollers are beautifully carved, have unique designs, release well, and have a smooth carved texture. MRL Mini Rollers are made from wood and finished with tung oil to ensure durability for many years of use. The Mini Rollers are easily cleaned with water and a soft toothbrush. All MKM MRL Mini Rollers are best rolled with the RH-2 Handle. The RH-2 splits apart to facilitate inserting a different MRL Roller. One RH-2 is all you need to use for any MRS, MRL, or MRX roller. The RH-2 and MRL Rollers are sold separately.
This tool has a fine, sharp needle used for the placement of the lace as well as a blade curved with a point for pressing and cleanup. The blade is stainless steel with a hardwood handle for a total length of 6-3/4".
MRL Mini Rollers have a rolling design face that is 1.0 cm (0.4 inch) across. MKM Mini Rollers are beautifully carved, have unique designs, release well, and have a smooth carved texture. MRL Mini Rollers are made from wood and finished with tung oil to ensure durability for many years of use. The Mini Rollers are easily cleaned with water and a soft toothbrush. All MKM MRL Mini Rollers are best rolled with the RH-2 Handle. The RH-2 splits apart to facilitate inserting a different MRL Roller. One RH-2 is all you need to use for any MRS, MRL, or MRX roller. The RH-2 and MRL Rollers are sold separately.
These lightweight and easy to handle calipers transfer measurements from model to clay for both inside and outside dimensions. They are made from a tough aluminum alloy, and are assembled with rust-free hardware that is easily adjusted by hand.
MRL Mini Rollers have a rolling design face that is 1.0 cm (0.4 inch) across. MKM Mini Rollers are beautifully carved, have unique designs, release well, and have a smooth carved texture. MRL Mini Rollers are made from wood and finished with tung oil to ensure durability for many years of use. The Mini Rollers are easily cleaned with water and a soft toothbrush. All MKM MRL Mini Rollers are best rolled with the RH-2 Handle. The RH-2 splits apart to facilitate inserting a different MRL Roller. One RH-2 is all you need to use for any MRS, MRL, or MRX roller. The RH-2 and MRL Rollers are sold separately.
MRL Mini Rollers have a rolling design face that is 1.0 cm (0.4 inch) across. MKM Mini Rollers are beautifully carved, have unique designs, release well, and have a smooth carved texture. MRL Mini Rollers are made from wood and finished with tung oil to ensure durability for many years of use. The Mini Rollers are easily cleaned with water and a soft toothbrush. All MKM MRL Mini Rollers are best rolled with the RH-2 Handle. The RH-2 splits apart to facilitate inserting a different MRL Roller. One RH-2 is all you need to use for any MRS, MRL, or MRX roller. The RH-2 and MRL Rollers are sold separately.
These lightweight and easy to handle calipers transfer measurements from model to clay for both inside and outside dimensions. They are made from a tough aluminum alloy, and are assembled with rust-free hardware that is easily adjusted by hand.
Fine bristles that provide the right degree of stiffness for the short stroke texture techniques used to apply textures to small hard-to-get-at areas. The stainless steel bristles are firmly set in a firm grip, textured aluminum handle for a total length of 5".
MRL Mini Rollers have a rolling design face that is 1.0 cm (0.4 inch) across. MKM Mini Rollers are beautifully carved, have unique designs, release well, and have a smooth carved texture. MRL Mini Rollers are made from wood and finished with tung oil to ensure durability for many years of use. The Mini Rollers are easily cleaned with water and a soft toothbrush. All MKM MRL Mini Rollers are best rolled with the RH-2 Handle. The RH-2 splits apart to facilitate inserting a different MRL Roller. One RH-2 is all you need to use for any MRS, MRL, or MRX roller. The RH-2 and MRL Rollers are sold separately.
These lightweight and easy to handle calipers transfer measurements from model to clay for both inside and outside dimensions. They are made from a tough aluminum alloy, and are assembled with rust-free hardware that is easily adjusted by hand.
MRL Mini Rollers have a rolling design face that is 1.0 cm (0.4 inch) across. MKM Mini Rollers are beautifully carved, have unique designs, release well, and have a smooth carved texture. MRL Mini Rollers are made from wood and finished with tung oil to ensure durability for many years of use. The Mini Rollers are easily cleaned with water and a soft toothbrush. All MKM MRL Mini Rollers are best rolled with the RH-2 Handle. The RH-2 splits apart to facilitate inserting a different MRL Roller. One RH-2 is all you need to use for any MRS, MRL, or MRX roller. The RH-2 and MRL Rollers are sold separately.
HR HandRollers are deeply carved, have unique designs, and release well from clay and any soft medium. All MKM rollers are made from wood that is precision carved to make deep beautiful impressions. The rollers are also beveled carved, allowing them to release easily from clay. You simply roll the HR roller with your hand across the clay or up the wall of a pot to create a beautiful pattern. Because of their smaller size and lightweight HR rollers are perfect for rolling vertically up the walls of a thrown pot. HR rollers also work great on slabs. The ends of the rollers are rounded to avoid a line along each side of the pattern. This allows patterns to blend. For long rolls, the MKM Roller Board can help create long smooth rolls and avoid knuckle bumps. MKM rollers are finished with tung oil to ensure durability over many years of use. MKM tools are easily cleaned with water and a soft toothbrush.
These tools present a variety of shapes and sizes of blades to accommodate the ordinary as well as the intricate cleanup job. All blades are made from high quality stainless steel with a double edge keenly sharpened.
Prevents broken nails, needle tools, and your favorite fettling knives. Bat Lifter will empower a potter remove any sticky bat or heavy wheel throwing work with confident off the wheel head.
HR HandRollers are deeply carved, have unique designs, and release well from clay and any soft medium. All MKM rollers are made from wood that is precision carved to make deep beautiful impressions. The rollers are also beveled carved, allowing them to release easily from clay. You simply roll the HR roller with your hand across the clay or up the wall of a pot to create a beautiful pattern. Because of their smaller size and lightweight HR rollers are perfect for rolling vertically up the walls of a thrown pot. HR rollers also work great on slabs. The ends of the rollers are rounded to avoid a line along each side of the pattern. This allows patterns to blend. For long rolls, the MKM Roller Board can help create long smooth rolls and avoid knuckle bumps. MKM rollers are finished with tung oil to ensure durability over many years of use. MKM tools are easily cleaned with water and a soft toothbrush.
MRL Mini Rollers have a rolling design face that is 1.0 cm (0.4 inch) across. MKM Mini Rollers are beautifully carved, have unique designs, release well, and have a smooth carved texture. MRL Mini Rollers are made from wood and finished with tung oil to ensure durability for many years of use. The Mini Rollers are easily cleaned with water and a soft toothbrush. All MKM MRL Mini Rollers are best rolled with the RH-2 Handle. The RH-2 splits apart to facilitate inserting a different MRL Roller. One RH-2 is all you need to use for any MRS, MRL, or MRX roller. The RH-2 and MRL Rollers are sold separately.
Used for modeling in soft clay, cleaning seam lines, cutting and restoring detail. This unfinished all-wood tool has a sharp point at one end, a flat and square on the other, and 7-1/2" total in length.
HR HandRollers are deeply carved, have unique designs, and release well from clay and any soft medium. All MKM rollers are made from wood that is precision carved to make deep beautiful impressions. The rollers are also beveled carved, allowing them to release easily from clay. You simply roll the HR roller with your hand across the clay or up the wall of a pot to create a beautiful pattern. Because of their smaller size and lightweight HR rollers are perfect for rolling vertically up the walls of a thrown pot. HR rollers also work great on slabs. The ends of the rollers are rounded to avoid a line along each side of the pattern. This allows patterns to blend. For long rolls, the MKM Roller Board can help create long smooth rolls and avoid knuckle bumps. MKM rollers are finished with tung oil to ensure durability over many years of use. MKM tools are easily cleaned with water and a soft toothbrush.
Use both blades for smoothing those hard to reach areas of your pieces as well as trimming and cleanup. Blades are made from stainless steel, making this tool 8-1/2" total in length.
MRL Mini Rollers have a rolling design face that is 1.0 cm (0.4 inch) across. MKM Mini Rollers are beautifully carved, have unique designs, release well, and have a smooth carved texture. MRL Mini Rollers are made from wood and finished with tung oil to ensure durability for many years of use. The Mini Rollers are easily cleaned with water and a soft toothbrush. All MKM MRL Mini Rollers are best rolled with the RH-2 Handle. The RH-2 splits apart to facilitate inserting a different MRL Roller. One RH-2 is all you need to use for any MRS, MRL, or MRX roller. The RH-2 and MRL Rollers are sold separately.
HR HandRollers are deeply carved, have unique designs, and release well from clay and any soft medium. All MKM rollers are made from wood that is precision carved to make deep beautiful impressions. The rollers are also beveled carved, allowing them to release easily from clay. You simply roll the HR roller with your hand across the clay or up the wall of a pot to create a beautiful pattern. Because of their smaller size and lightweight HR rollers are perfect for rolling vertically up the walls of a thrown pot. HR rollers also work great on slabs. The ends of the rollers are rounded to avoid a line along each side of the pattern. This allows patterns to blend. For long rolls, the MKM Roller Board can help create long smooth rolls and avoid knuckle bumps. MKM rollers are finished with tung oil to ensure durability over many years of use. MKM tools are easily cleaned with water and a soft toothbrush.
MRL Mini Rollers have a rolling design face that is 1.0 cm (0.4 inch) across. MKM Mini Rollers are beautifully carved, have unique designs, release well, and have a smooth carved texture. MRL Mini Rollers are made from wood and finished with tung oil to ensure durability for many years of use. The Mini Rollers are easily cleaned with water and a soft toothbrush. All MKM MRL Mini Rollers are best rolled with the RH-2 Handle. The RH-2 splits apart to facilitate inserting a different MRL Roller. One RH-2 is all you need to use for any MRS, MRL, or MRX roller. The RH-2 and MRL Rollers are sold separately.
