Welcome to our new site. We hope you enjoy it. We are in our final testing to make sure everything is ready for you to come and SHOP. Look around all you like, we'll be officially open over here 12/26/24!
Start Your Kiln Journey with Skutt’s Firebox 8×6 Mini-Kiln
Attention, budding artists! You don’t need a big budget or a spacious studio to bring your ceramic dreams to life. Our Firebox 8×6 LT mini-kiln is your ticket to creative freedom. Fire ceramics, glass, metal, clay…this mini-kiln does it all with easy to use preset programs. It plugs into standard household voltage, has a UL safety listing, and includes a shelf kit and kiln wash. What more could you want? The ideal kiln for beginners.
Why Choose The Skutt Firebox 8×6?
Affordable Price Tag: Don’t break the bank as you get started in firing your own ceramic pieces.
Compact Design Fits Anywhere: You don’t need a huge space to locate your kiln and it works with standard household voltage (no expensive wiring required).
Easy For Beginners: Simple operation, plus it comes with a shelf kit and kiln wash.
Endless Creative Possibilities: Along with ceramics, the Firebox can be used for fusing glass and heat treating metal.
Support: Our legendary customer service and tech team is available to answer your questions via phone and email. Plus, our website features comprehensive guides and videos to help you every step of the way.
Now manufactured with the Mini Touchscreen Controller! Skutt has taken things a touch more into the future for our smaller kiln models. Moving from the 3-Button Controller to the Mini Touchscreen was a no-brainer. This controller has nearly all the features of the full-sized KMT controller and is just as easy to program.
Downloadable Spec Sheet:
FireBox 8x6 LT • 1 Phase 115 Volts
FireBox 8x4 LT • 1 Phase 115 Volts
Model PF8 Craft/Test Kiln with a Genesis Mini Touchscreen Controller
8" Square x 9" High (0.33 cu ft)
This kiln can fire to Cone 10 on a standard 15-amp circuit, and draws only 12.5 amps
Extra-insulated sides with 2-1/2" K23 brick and 1" of backup insulation; Top & Bottom are 3" K23 brick
Kiln plugs into a separate control panel with power and thermocouple wire jack
Door safety switch shuts off power to the elements when the door is opened
Hard ceramic element channels
Includes one 7" by 7" by 3/8" shelf and three 4" posts
Not yet listed to UL499
Includes Genesis-Mini Touchscreen Control
Downloadable Spec Sheet
Plug-n-Fire • 1 Phase 120 V
Designed for K-12 Schools with low-fire programs
Works on all voltages 208-240v
3" thick Firebrick
Genesis Mini Touch Screen Control - intuitive programming, comes with a free app for monitoring kiln
Hard Ceramic Element Channels protect elements and fragile firebrick, improves kiln life dramatically
Piggy-back Control Panel - easy & safe servicing, keeps electronics cool
Ceramic Terminals make changing elements easy without crimping
Protected Thermocouple - for worry-free loading
Solid, Straight-View Peephole Plug - no chance of falling out
Spring-Lift lid - easy to lift, no support bar restricting loading
Stainless Steel Case
Full Support Stand extends the life of the bottom brick
3" brick adds strength and insulation for increased energy efficiency
Comes with a Five-Year Warranty!
Power connection: All kilns are rated for Cone 6 but recommended for up to Cone 1 low-fire. They will work on any voltage from 208 to 240 volts. Kilns may be ordered for single-phase or three-phase. Single-phase kilns come with a 6-foot 6-50 plug. Three-phase kilns come with a 6-foot 15-50 cord.
119D
Overview
.57 Cubic Feet
2 Years Warranty
Double Insulated Wall
Kanthal A-1 Elements
120 Volts
18 Amps
20 Amp Breaker Required
Bartlett Controller
The Tucker’s cone Art Kiln Model 119D is an excellent choice for firing small items such as dolls. This kiln is especially useful as a test kiln since it fires to cone 10 using 120-volts.
It is a double insulated kiln with 2 ½” of premium firebrick plus 1″ of block insulation. This 3 ½” thick wall saves approximately 30 % in electricity costs and has a safer, cooler outside jacket.
The cone 10 Kanthal A-1 elements are standard.
The jacket and fittings are stainless steel.
The Bartlett electronic controller is mounted on an angled easy view control panel.
This kiln is available with either the standard V6-CF keypad or the new Genesis touch screen. The standard model is the BX119D. The Genesis version is GX119D.
There isn’t a better-built, more convenient small test kiln on the market today than the Tucker’s Cone Art Model 119D.
Overview
4.7 Cubic Feet
Double Wall Construction
Kanthal A-1 Elements
208 or 240 Volts
50 Amp Breaker Required
Bartlett Controller
The Cone art 2318D is rapidly becoming a favourite for home studios and schools. It is exactly like the popular 2318D except it is 18″ deep. This makes it much easier to load and unload. It has the same heavy duty double wall construction as all of the other Cone Art pottery kilns resulting in approximately 30% less heat loss through the walls than a brick only kiln. The 2318D kiln comes equipped with a Bartlett 2 zone controller and Cone Art’s patented lid lifter at no extra charge.
This kiln is available with either the standard V6-CF keypad or the new Genesis touch screen. The standard model is the BX2318D. The Genesis version is GX2318D.
Overview 8.4 Cubic feet 23″ wide X 27″ deep Double wall construction Kanthal A-1 Elements Sectional Design 208 or 240 Volts 70 Amp breaker required 3 Zone Bartlett Controller at NO EXTRA CHARGE New Lid lifter Design at NO EXTRA CHARGE CSA Approved Product Description New from Cone Art Kilns: People love the 2327 D SQ so much that we decided to extend the line up. Now that same stacking space of square shelves is available in shorter models too. This top loader comes with all the standard features that set Cone Art apart: heavy duty floor element, double wall design, patented lid lifter system, multi zone control, and over sized swing out control panel. This kiln will easily fire to cone 10 and gives you a full 5.6 cu ft of stacking space. Not all pots are round…..and all kilns shouldn’t be either. This kiln is available with either the standard V6-CF keypad or the new Genesis touch screen. The standard model is the BX2327D SQ. The Genesis version is GX2327D SQ. Furniture Kit 3 – 21x21x3/4″ square shelves 2 – 21×10-1/2×3/4″ shelves 3 ea: 1, 2, 6, 8″ posts 6 – 4″ posts 2 kgs Kiln wash
Overview 7 Cubic feet 23″ wide X 22.5″ deep Double wall construction Kanthal A-1 Elements Sectional Design 208 or 240 Volts 70 or 80 Amp breaker required 3 Zone Bartlett Controller at NO EXTRA CHARGE Lid lifter Design at NO EXTRA CHARGE CSA Approved Product Description New from Cone Art Kilns: People love the 2327 D SQ so much that we decided to extend the line up. Now that same stacking space of square shelves is available in shorter models too. This top loader comes with all the standard features that set Cone Art apart: heavy duty floor element, double wall design, patented lid lifter system, multi zone control, and over sized swing out control panel. This kiln will easily fire to cone 10 and gives you a full 5.6 cu ft of stacking space. Not all pots are round…..and all kilns shouldn’t be either. This kiln is available with either the standard V6-CF keypad or the new Genesis touch screen. The standard model is the BX12322D SQ. The Genesis version is GX2322D SQ. Furniture Kit 3 – 21x21x3/4″ square shelves 2 – 21×10-1/2×3/4″ shelves 3 ea: 1, 2, 6, 8″ posts 6 – 4″ posts 2 kgs Kiln wash
Overview 5.6 Cubic feet 23″ wide X 22.5″ deep Double wall construction Kanthal A-1 Elements Sectional Design 208 or 240 Volts 70 or 80 Amp breaker required 3 Zone Bartlett Controller at NO EXTRA CHARGE Lid lifter Design at NO EXTRA CHARGE CSA Approved Product Description New from Cone Art Kilns: People love the 2327 D SQ so much that we decided to extend the line up. Now that same stacking space of square shelves is available in shorter models too. This top loader comes with all the standard features that set Cone Art apart: heavy duty floor element, double wall design, patented lid lifter system, multi zone control, and over sized swing out control panel. This kiln will easily fire to cone 10 and gives you a full 5.6 cft of stacking space. Not all pots are round…..and all kilns shouldn’t be either. This kiln is available with either the standard V6-CF keypad or the new Genesis touch screen. The standard model is the BX2318D SQ. The Genesis version is GX2318D SQ. Furniture Kit 2 – 21x21x3/4″ square shelves 2 – 21×10-1/2×3/4″ shelves 3 ea: 1, 2, 4, 6, 8″ posts 2 kgs Kiln wash
This 8 sided Skutt kiln has a 18" interior diameter and is 22" inches deep. The chamber size is tall enough to fire a 18″ tall pot and wide enough to hold a 15″ platter.
Downloadable Spec Sheets:
2.5" Brick Models (KM or KMT) | 3" Brick Models (KM or KMT)
818 • 1 Phase 240 Volts | 818-3 • 1 Phase 240 Volts
818 • 1 Phase 208 Volts | 818-3 • 1 Phase 208 Volts
OVERVIEW
8.33 Cubic Feet
28" wide X 22.5" deep
Double Wall Insulation
Kanthal A-1 Elements
208 or 240 Volts
63 or 72.5 Amp Breaker required
3 Zone Bartlett Controller at NO EXTRA CHARGE
New Lid Lifter at NO EXTRA CHARGE CSA approved
DESCRIPTIONThe Cone Art BX2822D will easily fire to cone 10. With a 28” interior diameter this kiln is suited for 26” diameter shelves, and just like the BX2322D is a little easier to reach the bottom than with standard depth kilns. 3 thermocouples and double wall construction results in energy efficiency, and Cone Art's standard element in the floor helps to ensure even firings every time. Just like the deeper models, this kiln easily disassembles into 3 sections for easy delivery. Combining Cone Art's patented lid lifter with the 22.5” depth make this an ideal production kiln for baby boomers. The kiln is big enough to hold a large load while being easy on your back.
This 10 sided Skutt kiln has a 23" interior diameter and is 18" inches deep. The chamber size is tall enough to fire a 14″ tall pot and wide enough to hold a 21″ platter.
Downloadable Spec Sheets:
2.5" Brick Models (KM or KMT) | 3" Brick Models (KM or KMT)
1018 • 1 Phase 240 Volts | 1018-3 • 1 Phase 240 Volts
1018 • 1 Phase 208 Volts | 1018-3 • 1 Phase 208 Volts
The Skutt 1627-3 PK Oval kiln has a 46" x 31" interior and is 27" inches deep. The chamber size is 18.5 cubic feet.
The PK stands for “Production Kiln” and that is exactly what these things are designed for.
One of the most important things you need in a large production kiln is power… and the KM1627-3 has it in spades! An under-powered production kiln will fire slow and cause your elements to spend more time than necessary at high temperatures which can drastically reduce their useful life. Time is money, and when you are in business you can’t afford to waste either one.
The power is delivered by industrial grade wiring and components that can more than handle it.
The elements are connected by a unique bus bar system make it very easy to replace the elements.
We offer a Cone 10 model as well as a low fire model (Cone 1) for companies that may have limited power available to them.
Downloadable Spec Sheets:
(KM or KMT)
1627PKLF • 1 Phase 240 Volts
1627PKLF • 1 Phase 208 Volts
1627PK • 3 Phase 240 Volts
1627PK • 3 Phase 208 Volts
This 12 sided Skutt kiln has a 28" interior diameter and is 31" inches deep. The chamber size is tall enough to fire a 27″ tall pot and wide enough to hold a 26″ platter.
The PK stands for “Production Kiln” and that is exactly what these things are designed for. One of the most important things you need in a large production kiln is power… and the PK Kiln has it in spades!
Downloadable Spec Sheets:
(KM or KMT)
1231PK • 1 Phase 240 Volts
1231PK • 1 Phase 208 Volts
1231PK • 3 Phase 240 Volts
1231PK • 3 Phase 208 Volts
This 12 sided Skutt kiln has a 28" interior diameter and is 27" inches deep. The chamber size is tall enough to fire a 23″ tall pot and wide enough to hold a 26″ platter.
The PK stands for “Production Kiln” and that is exactly what these things are designed for. One of the most important things you need in a large production kiln is power… and the PK Kiln has it in spades!
Downloadable Spec Sheets:
(KM or KMT)
1227PK • 1 Phase 240 Volts
1227PK • 1 Phase 208 Volts
1227PK • 3 Phase 240 Volts
1227PK • 3 Phase 208 Volts
This 12 sided Skutt kiln has a 28" interior diameter and is 27" inches deep. The chamber size is tall enough to fire a 23″ tall pot and wide enough to hold a 26″ platter.
Downloadable Spec Sheets:
(KM or KMT)
1227 • 1 Phase 240 Volts
1227 • 1 Phase 208 Volts
1227 • 3 Phase 240 Volts
1227 • 3 Phase 208 Volts
The Cone Art Kilns Model 2336D is a large 12 cubic foot oval kiln with a full 36" width. It has been designed especially for the busy production artist and sculptor studio that need the extra width. It is a double insulated kiln with a wall profile of 2.5 " premium firebrick plus 1" of block insulation. The extra insulation ensures a cooler, safer jacket, longer element life, and approximately 30% savings in electricity costs. The kiln is clad in a stainless steel jacket for extra protection and durability.
There are heavy-duty Kanthal A-1 elements in the walls and floor. This makes firing to cone 10 a breeze even with high mass loads. This kiln is equipped with a counter weight lid lifter and Bartlett electronic controller with 3 Zone Control panel mounted on an angle for easy viewing. Both features come standard at NO EXTRA CHARGE. There is no other kiln that can match the Tuckers Cone Art Kilns feature for feature. Three-zone control with the Bartlett electronic controller comes at NO EXTRA CHARGE so the kiln will fire perfectly time after time. Now, also a standard feature, the Cone Art Lid Lifter at NO EXTRA CHARGE. Lift the lid with one finger! There is no kiln on the Market today that has as many excellent features at such a good price as the Tuckers Cone Art 2327D.
This 12 sided Skutt kiln has a 28" interior diameter and is 22" inches deep. The chamber size is tall enough to fire a 18″ tall pot and wide enough to hold a 26″ platter.
Downloadable Spec Sheets:
(KM or KMT)
1222 • 1 Phase 240 Volts
1222 • 1 Phase 208 Volts
1222 • 3 Phase 240 Volts
1222 • 3 Phase 208 Volts
The Tuckers Cone Art Kiln Model 4227D is a massive 16.5 cubic feet oval kiln with a full 42" width, 31" from front to back and a 27" depth. The 4227D is designed for a busy production or sculpture studio. It is a double insulated kiln with 2.5 " of premium firebrick plus 1" of block insulation around the walls. The floor and lid are constructed with 3" firebrick and has an additional 1" of block insulation. The entire kiln, including the lid, is clad in a stainless steel jacket for extra protection and durability. The extra insulation ensures even firings, stops heat loss through the walls and lid, saves 30% in electricity costs, and lengthens element life. There are heavy-duty Kanthal A-1 elements in the walls and floor. This kiln makes firing up to cone 10 effortless even with heavy loads. The kiln is equipped with a Bartlett Controller with 3 Zone Control at NO EXTRA CHARGE which is mounted on an angled easy view panel. The Tuckers Cone Art Kiln Model 4227D also comes with our patented LID LIFTER at NO EXTRA CHARGE. The 4227D has all the features and more that you need in a professional kiln. Three-zone control with the Bartlett electronic controller comes at NO EXTRA CHARGE so the kiln will fire perfectly time after time. Now, also a standard feature, the Cone Art Lid Lifter at NO EXTRA CHARGE. Lift the lid with one finger! There is no kiln on the Market today that has as many excellent features at such a good price as the Tuckers Cone Art BX2327D.
Overview 1.7 Cubic Feet Double Wall Insulation Kanthal A-1 Elements 208 or 240 Volts 30 Amp Breaker Required Bartlett or Genesis Touchscreen Controller The Tuckers Cone Art model 1813D is a very versatile kiln. It is used in doll studios, the pottery studios and classrooms. It fires easily to a true cone 10. It is a double insulated kiln with 2.5 ” premium brick plus 1″ of block insulation. This double insulation saves approximately 30% in electricity costs and has a safer, cooler jacket. Kanthal A-1 elements, stainless steel jacket and fittings, and excellent Cone Art craftsmanship all are standard. The Bartlett electronic controller is mounted in an angled, easy view control panel for precise control. This kiln is available with either the standard V6-CF keypad or the new Genesis touch screen. The standard model is the BX1813D. The Genesis version is GX1813D. The Tuckers Cone Art Model 1813D is an excellent choice if you want the best cone 10 kiln built today.
This 12 sided Skutt kiln has a 28" interior diameter and is 18" inches deep. The chamber size is tall enough to fire a 14″ tall pot and wide enough to hold a 26″ platter.
Downloadable Spec Sheets:
(KM or KMT)
1218-3 • 1 Phase 240 Volts
1218-3 • 3 Phase 240 Volts
1218-3 • 1 Phase 208 Volts
1218-3 • 3 Phase 208 Volts
The Tuckers Cone Art Kilns Model BX2818D is a perfect choice for firing wide objects such as platters yet the low profile makes it easy to load and unload.
It is a double insulated kiln with 2.5" of premium firebrick plus 1" of solid block insulation. This extra insulation provides a cooler safer jacket and will save approximately 30% in energy costs. All of our kilns have heavy-duty Kanthal A-1 Elements and the BX2818D also has a floor element for more even firings. The Bartlett electronic controller comes with 2-zone control at NO EXTRA CHARGE and is mounted on an angled, easy view panel. The Tuckers Cone Art BX2818D also comes with our NEW Lid Lifter at NO EXTRA CHARGE. Lift the Lid with one finger!
This 8 sided Skutt kiln has a 18" interior diameter and is 18" inches deep. The chamber size is tall enough to fire a 14″ tall pot and wide enough to hold a 15″ platter.
Downloadable Spec Sheets:
2.5" Brick Models (KM or KMT) | 3" Brick Models (KM or KMT)
818 • 1 Phase 240 Volts | 818-3 • 1 Phase 240 Volts
818 • 1 Phase 208 Volts | 818-3 • 1 Phase 208 Volts
This 7 sided Skutt kiln has a 14" interior diameter and is 13.5" inches deep. The chamber size is tall enough to fire a 9.5″ tall pot and wide enough to hold a 13″ platter.
Downloadable Spec Sheets:
(KM or KMT)
714 • 1 Phase 120/208-240V
Fits most small studios. Runs on regular household electricity, 5-20 outlet. Has all the bells and whistles of the larger kilns in a more compact size
Click here to download the KMT 614-3 spec sheet
OVERVIEW 3.3 Cubic Feet 17.5" across X 22.5 deep Double Wall construction Kanthal A-1 Elements 208 or 204 Volts 40 Amp Breaker Required Bartlett Controller or Genesis Touchscreen Controller CSA approved This kiln is an excellent choice for the home studio or school. It is a double insulated kiln with 2 ½" of premium firebrick plus 1" of block insulation. This double wall insulation ensures a safer, cooler jacket and approximately 30% energy savings over single wall kilns. The heavy-duty Kanthal A-1 elements are standard along with a floor element for more even firings. The jacket and fittings are all stainless steel or corrosion resistant metal. The Tucker’s Cone Art 1822D sets the standard for excellence in quality construction and reliability.
The Cone Art Kiln BX2827D is a true production kiln that has been designed to fire easily to cone 10 even with high mass loads like tiles.It is a double insulated kiln with 2.5 " of premium firebrick plus 1" of block insulation. This extra thick wall insulation ensures a cooler, safer jacket that can save approximately 30% in electricity costs. It also gives longer element life since the elements don't have to work so hard.Heavy-duty Kanthal A-1 elements are installed in the walls and floor for perfectly even firings.The Bartlett Controller comes with 3 Zone Control at NO EXTRA CHARGE which is mounted on an angled easy view panel.The Tuckers Cone Art Kiln Model BX2827D also comes with our NEW LID LIFTER at NO EXTRA CHARGE. There is no other Kiln on the market today that can come close to matching all of these features.
Overview
5.83 Cubic feet
23.5″ wide X 22.5″ deep
Double wall construction
Kanthal A-1 Elements
Sectional Design
208 or 240 Volts
60 Amp breaker required
New Lid lifter Design at NO EXTRA CHARGE
CSA Approved
The 5.83 cubic foot capacity makes it an ideal kiln for the home studio or smaller school classrooms.
It is a double insulated kiln with 2.5" of premium firebrick plus 1" of block insulation around the outside circumference of the kiln. This double insulation saves approximately 30% in electricity costs and the jacket remains cooler. The perfectly designed Kanthal A-1 elements allow it to fire to come 10 with ease and the unique floor element ensures an even firing.Three-zone control with the Bartlett electronic controller comes at NO EXTRA CHARGE so the kiln will fire perfectly time after time. Now, also a standard feature, the Cone Art Lid Lifter at NO EXTRA CHARGE. Lift the lid with one finger!There are no kilns on the Market today that has as many excellent features at such a good price as Cone Art Kilns.
Overview
7.0 Cubic feet
Double wall construction
Kanthal A-1 Elements
Sectional Design
208 or 240 Volts
60 Amp breaker required
3 Zone Control at NO EXTRA CHARGE
New Lid lifter Design at NO EXTRA CHARGE
The Cone Art Kiln model BX2327D is the most popular kiln that Cone Art produces!The large 7 cubic foot capacity makes it an ideal kiln for the busy home studio or school classroom.It is a double insulated kiln with 2.5" of premium firebrick plus 1" of block insulation around the outside circumference of the kiln. This double insulation saves approximately 30% in electricity costs and the jacket remains cooler. The perfectly designed Kanthal A-1 elements allow it to fire to come 10 with ease and the unique floor element ensures an even firing.Three-zone control with the Bartlett electronic controller comes at NO EXTRA CHARGE so the kiln will fire perfectly time after time. Now, also a standard feature, the Cone Art Lid Lifter at NO EXTRA CHARGE. Lift the lid with one finger!There is no kiln on the Market today that has as many excellent features at such a good price as the Tuckers Cone Art BX2327D.
Configure exactly the kiln you want!!
Select your width, depths and electrical specs!
L&L Kilns are Built to Last
L&L kilns are the most "industrialized" kilns in the "hobby-kiln" class. They last for decades. Take a look at some of our top-rated features like hard ceramic element holders, ceramic protection tubes, super-strong stands, spring hinge systems, arched roofs in front-loading kilns and on and on. L&L backs this up with a three-year limited warranty and, for the School-Master K12 kilns, a five-year limited warranty.
Simplicity
Everything in an L&L kiln is logical. L&L thinks ahead and try to anticipate the problems you will encounter. That has been our tradition since L&L was started.
Serviceability
L&L engineers serviceability into every kiln. Control panels are easy to open and service. The unique hard ceramic element holders and ceramic terminal boards make changing elements something that anyone can do.
Support
Take a look at the extensive help available on the L&L web site. Look at some videos and a few Knowledgebase articles. They are invested in service.
Get what is right for you
L&L offers many different types of kilns and options so you can get exactly the right kiln for you.
Higher value means lower cost
L&L charges a little more because of all we put into our kilns. For that you will get a kiln that will last substantially longer and does the job you bought it to do. It's about value.
Kiln Facts: Why choose an L&L Kiln?
Top Features of L&L Kilns(links take you to more information on the L&L website)
Durability
Hard Ceramic Element Holders Make L&L Kilns More DurableDurability, Repairability, Better Heat Transfer. The smooth, hard surface of the inside ceramic channel allows the elements to expand and contract freely. No pins! The dense ceramic holders extend element life because they do not insulate the hot elements from the kiln interior.
Thermocouple Protection Tubes Mullite protection tubes extend thermocouple life and keep kiln clean. The mullite protection tube keeps the metal oxides of the thermocouple tip from dropping off and contaminating your work.
Solid Super-Strong 14 Gauge Aluminized Steel Stand Aluminized stands are extremely strong and corrosion resistant. The offer solid support under the kiln - unlike spot-welded angle stands that are common in the industry.
Proprietary Reflective Coating Hardens & Seals Brick Special brick coating hardens and seals brick for durability and cleaner operation.
Performance
Automatic Zone ControlZone control gives you the utmost in controllable temperature uniformity. The DynaTrol separately measures temperatures in the bottom, middle and top of the kiln and automatically adjusts the heat output of three zones during the entire firing.
DynaTrol Multi-Program Zone Control DynaTrol with 4 Easy-Fire programs (Slow Bisque, Fast Bisque, Slow Glaze, Fast Glaze), 6 custom programs, PreHeat, Delay, Program, Segment Review, and Diagnostics. Zone control included on most kilns.
Ease of Use
"Easy-Open, Easy-Load" Spring Hinge Feather-light spring hinge allows full access without a side support bar - for easy loading. Standard on all 10 and 10 sided polygonal kilns.
Solid Wide-View Peephole Plugs Solid large non-tapered peepholes allow a wider view into the kiln.
Support
Standard Three-Year Limited Warranty Most L&L Kilns have a three-year limited warranty.
The newest edition to the PK family!
The Skutt 1427PK Oval kiln has a 40" x 23" interior and is 27" inches deep. The chamber size is 12.75 cubic feet.
This high-capacity Cone 10 kiln is ideal for sculpture artists and production potters working from home. Available in 1PH, it can be installed in most residential buildings. Like all of our Production Kiln (PK) models, it incorporates solid-state relays, busbar element connectors, and heavy-duty wiring. It also features Zone Control, dual lid braces, and a standard lid lifter. Additionally, it is available with the Kilnmaster controller.
Downloadable Spec Sheets:
(KM or KMT)
1427PK • 1 Phase 240 Volts
1427PK • 1 Phase 208 Volts
1427PK • 3 Phase 240 Volts
1427PK • 3 Phase 208 Volts
