Xiem double-sided and washable Sanding Sticks are made from aluminum oxide grit on a firm backing. No sanding block is needed. They’re perfect for sanding, shaping, refining, and finishing a variety of surfaces and materials such as woods, plastics, acrylics, alabasters, and ceramics—green wares and bisque wares. Available in a pack of two for fine, medium, or coarse grit.
Size 1.25 “W x 7”L
Available in a pack of two for fine, medium, and coarse grit.
NOTE: The wax resist is colored with a pink or purple tint (that burns out completely), but the actual shade varies by batch. Recently we were sent a sample of the Mr. Mark’s Wax On. We enjoyed testing this wax resist and found it to be excellent for precision application on bisque fired ware. The light purple color, which completely burns out, makes it easy to see as you are applying it. The wax brushes on smoothly and dries quickly – about 5 minutes! The special hardening agent in this wax also ensures that any glaze that drips over onto the wax will wipe off easily with a wet sponge. Mr. Mark’s Wax On also works exceptionally well for the “Wax and Wipe” technique on leather-hard or bone dry clay. Apply the wax directly onto your un-bisque fired piece, (I tested it on both a fresh slab and on a bone dry piece), allow it to dry, then use a sponge to remove the clay from the bare places. The wax seals over the clay underneath it, leaving those areas raised. After bisque-firing, you’re left with a nice embossed (or debossed) texture. Mr. Marks’ Wax ON is a wax resist product that contains a special hardener that quickly sets the wax. It was created to eliminate problematic dripping and tacky surfaces when applying wax. Now you can decorate with wax during glazing without worrying about pesky smudges and sticky fingers. It is ideal for creating detailed, precise surface decoration on bisqueware and can be applied with either a brush or slip applicator. The pink/purple color allows you to easily visualize where wax is applied. However, the color burns out in the firing, just like regular wax. Wax ON should be stored at room temperature and mixed well before use. Brushes and tools used for application of Wax ON should be washed after use.
CSI Turntables are made of two plastic laminate covered particle boards (plastic laminate design will vary from one to the other) with a stainless steel ball bearing, screwed into the inside surfaces of the boards. The 8" & 10" turntables have a 4" bearing capable of supporting at least 200# and the 12", 14" & 16" have a 6" bearing capable of supporting at least 300#. To clean, wipe with a damp sponge (do not submerge the turntable in water).
Aftosa Wax Resist is used to resist glazes. It should be thinned with water to suit the potter's use. The wax is applied to the base and rims of the pieces before glazing. Allow the wax three to four hours to dry before glazing (some clean up with a sponge may be required) or before adding a second coat. Aftosa Wax Resist is also excellent for use in decorating pottery. Although Aftosa Wax Resist is tinted green so it is easy to see while you are working with it, the Wax Resist fires clear and the Black Wax Resist leaves a black line after being fired. The wax has a shelf life of 2-3 years. If used improperly, it can become contaminated. Always keep the lid tight on the original container. Pour a small amount in a separate container, use as desired, and dispose of the excess. Do NOT pour wax back into the original container. If the wax has a strong, sour odor, it has been contaminated. Clean up is easy with warm, soapy water. Please Note: The Wax will FREEZE in cold climates and will not resist effectively. If the wax has frozen, it will get lumpy and separate. Wax Resist will be sent to cold regions in the winter only at the customer's risk.
SHIMPO’s banding wheels are used for decorating, sculpting, carving and hand building. Designed to provide reliably smooth and even rotation for the most delicate applications. It's no wonder they are the banding wheel of choice for studio artists, production potters and classrooms alike. In five different models, we offer a selection of wheel-head diameters and heights. Banding Wheels Solid Cast-iron Construction Heavy-duty construction ensures many years of use and will hold a spin and stay in place as needed Sealed Ball Bearings Extra smooth and even rotation (no wobbling or sticking) One-piece Design Will not come apart when lifted Top Grade Paint Coating Rust-resistant Warranty 1-year
Model
BW-30M
BW-25H
BW-25L
BW-22L
BW-18L
Diameter 11 ¾" 9 7/8" 9 7/8" 8 ¾" 7" Height 4 ¾" 7 ½ 2 ¼" 2 ¼" 2 ¼" Ship Weight 28 lbs. 19 lbs. 15 lbs. 13 lbs. 6.50 lbs.
Xiem's foam brush is made from the highest quality foam and is secured on a plastic handle for wax-resist application on pottery. It is also excellent for oxides, stains, inks, and glazes in hard to reach ares.
Small: .25" wide X4" long
Medium: .5" wide by .4.8" long
Large: .6" wide X 5" long
Available in 10 packs or 20 packs
This white paste is an excellent mending material for bisque that can be used to bond pieces together or fill up broken cavities. Bisque Fix can be colored to match the bisque using metal oxides or ceramic stains. After applying with a spatula, fire to the temperature of the clay and glaze that you are using -- up to Cone 10 (2381°F, 1305°C). Important Storage Note:Bisque fix is and air set concrete type product. There is a way to keep it longer. After you have used it and are ready to put it away, put a thin layer of water in the jar then recap and store. When you go to use it again pour off the water, remix and apply as normal.
Xiem's Precision Applicator is a true innovation for glazing, slip-trailing, fine detailing, writing, wax-resisting, painting and any other liquid decorating technique you can dream up! Our system consists of a super-soft rubber applicator bulb, nickel-plated connector and your choice of 8 interchangeable tips. It's lightweight, easy to use and clean, plus our precision tip and connector system ensures that air pressure is regulated evenly and effortlessly. This 1 oz. Precision Bulb Applicator set includes: 1 oz. Applicator Bulb Nickel-Plated Stainless Connector Four (4) Precision Applicator Tips 15 gauge 17 gauge 19 gauge 21 gauge Bonus: Two (2) Tip cleaning pins. Packaging: Reusable Tube
Mr. Mark's Removable Wax Off Resist is a wax we have created for potters and decorative artists. It is designed to be painted on like regular wax, but can easily be peeled away. The removal is simple and can be done in a short period of time. This allows for endless possibilities in design as well as layering. Our Wax Off! Resist drys in 5-10 minutes depending on how thick you put it on. It drys darker than it appears when wet (so you know when it's ready). It can even be applied to spots on your bisque ware that have already been dipped in glaze without lifting away the glaze. On top of all that it's affordable! You will never have to be afraid of dripping wax on your pots and being stuck with a waxing mistake again: now you can just peel it away! Helpful Hint: By resting your brush in soapy water while you are working with Wax Off, you will preserve the life of your brush. Clean your brushes with soap and water after use. Dish soap works great. There are no commercial preservatives in this product to prevent it from freezing. If your area of the world is freezing this product when exposed may harden. There are no refunds if this happens. Please be aware of your local weather.
Aftosa Wax Resist is used to resist glazes. It should be thinned with water to suit the potter's use. The wax is applied to the base and rims of the pieces before glazing. Allow the wax three to four hours to dry before glazing (some clean up with a sponge may be required) or before adding a second coat. Aftosa Wax Resist is also excellent for use in decorating pottery.
Although Aftosa Wax Resist is tinted green so it is easy to see while you are working with it, the Wax Resist fires clear and the Black Wax Resist leaves a black line after being fired. The wax has a shelf life of 2-3 years. If used improperly, it can become contaminated. Always keep the lid tight on the original container. Pour a small amount in a separate container, use as desired, and dispose of the excess. Do NOT pour wax back into the original container. If the wax has a strong, sour odor, it has been contaminated. Clean up is easy with warm, soapy water. 1. Trail or brush Black Wax Resist in desired pattern and allow to dry a minimum of 2 hours. 2. Apply glaze or slip by dipping or brushing. 3. Fire (cone 06-8). Results may vary - please test first. Please Note: The Wax will FREEZE in cold climates and will not resist effectively. If the wax has frozen, it will get lumpy and separate. Wax Resist will be sent to cold regions in the winter only at the customer's risk.
One of Anne M. Bracker's top 5 favorites!
16 gauge applicator tip is better for glazes and slips 18 gauge applicator bottle is better for underglazes Create an unlimited array of designs utilizing line and dot patterns on ceramic pieces with AMACO underglazes and these applicators. Two needle sizes allow you to make medium or fine lines, dots and letters. They may also be used with certain glazes.
An empty pint jar with lid. Perfect for storage of glazes, slips, and other liquids or materials. All-purpose straight-sided jars for storing and portioning glaze materials. Translucent for product visibility. Wide mouth for easy filling and pouring. Chemical and impact-resistant polypropylene. FDA compliant. Caps included.
This super-soft 1 oz rubber applicator bulb is part of the Xiem's Precision Applicator system. The system consists of an applicator bulb, nickel-plated connector and your choice of 8 interchangeable tips. A true innovation in ceramic glazing, slip-trailing, fine detailing, writing, wax-resisting, painting and any other liquid decorating technique you can dream up!
Xiem's Precision Applicator is a true innovation for glazing, slip-trailing, fine detailing, writing, wax-resisting, painting and any other liquid decorating technique you can dream up! Our system consists of a super-soft rubber applicator bulb, nickel-plated connector and your choice of 8 interchangeable tips. It's lightweight, easy to use and clean, plus our precision tip and connector system ensures that air pressure is regulated evenly and effortlessly. This 1 oz. Precision Bulb Applicator set includes: 1 oz. Applicator Bulb Nickel-Plated Stainless Connector Four (4) Precision Applicator Tips 15 gauge 17 gauge 19 gauge 21 gauge Bonus: Two (2) Tip cleaning pins. Packaging: Reusable Tube
16 gauge applicator tip is better for glazes and slips 18 gauge applicator bottle is better for underglazes Create an unlimited array of designs utilizing line and dot patterns on ceramic pieces with AMACO underglazes and these applicators. Two needle sizes allow you to make medium or fine lines, dots and letters. They may also be used with certain glazes.
Used to flow casting slips, glazes and engobes onto ceramic pieces in raised decorative designs. With a 4-ounce capacity, this bottle is made from polyethylene making it squeezable, easy, and light to hold. Comes with a round spout, a ribbon spout, and caps for both.
Throw like a girl enamel pin with glitter laces! These cloisonné enamel pins are the cutest! They come on an info card and measure about 1.5" at the widest point.
4 ounce jar Repairs ~ Add-ons ~ Attaching flowers, ribbons, etc. ~ Repairs to broken pieces ~ Fixing hairline cracks ~ Attaching greenware to greenware ~ Attaching greenware to bisque ~ Attaching bisque to bisque ~ Removing hard spots ~ Acts like a wood putty for larger area fill-ins. Directions: Do not wet the piece(s). Stir well, apply with brush to both sides. Press pieces together and hold until they stick together, then re-fire.
Water based wax emulsion used for glaze decorating. Glaze will be resisted where wax is applied. Dries quickly on bisque and in a consistency favorable to brush work. Please Note: The Wax will FREEZE in cold climates and will not resist effectively. If the wax has frozen, it will get lumpy and separate. Wax Resist will be sent to cold regions in the winter only at the customer's risk.
An empty 2 ounce jar with lid. Perfect for storage of glazes, slips, and other liquids or materials. All-purpose straight-sided jars for storing and portioning glaze materials. Translucent for product visibility. Wide mouth for easy filling and pouring. Chemical and impact-resistant polypropylene. FDA compliant. Caps included.
Enhance the usefulness of your Precision Applicator with our Easy Suction Adapter. Quickly converts the Precision Applicator into a general purpose suction device, allowing artists to fill up the bulb easily with liquid glazes and underglazes directly from any size bottles without creating a big mess. It also works great on any liquid oxide, stain and slip containers. It fits the 1oz and 3oz bulb.
This nickel-plated stainless connector is part of the Xiem's Precision Applicator system. The system consists of 1 oz. applicator bulb or 3 oz. applicator bulb, this nickel-plated connector and your choice of 8 interchangeable tips. Xiem Precision Applicator is a true innovation in ceramic glazing, slip-trailing, fine detailing, writing, wax-resisting, painting and any other liquid decorating technique you can dream up!
This super-soft 3 oz rubber applicator bulb is part of the Xiem's Precision Applicator system. The system consists of an applicator bulb, nickel-plated connector and your choice of 8 interchangeable tips. A true innovation in ceramic glazing, slip-trailing, fine detailing, writing, wax-resisting, painting and any other liquid decorating technique you can dream up!
Modeled after Leigh Anne Thompson's tree carved mug. These cloisonné enamel pins are the cutest! They come on an info card and measure about 1.5" at the widest point.
Modeled after Leigh Anne Thompson's tree carved mug. These cloisonné enamel pins are the cutest! They come on an info card and measure about 1.5" at the widest point.
Modeled after Leigh Anne Thompson's tree carved mug. These cloisonné enamel pins are the cutest! They come on an info card and measure about 1.5" at the widest point.
Modeled after Leigh Anne Thompson's tree carved mug. These cloisonné enamel pins are the cutest! They come on an info card and measure about 1.5" at the widest point.
Modeled after Leigh Anne Thompson's swirl mug. These cloisonné enamel pins are the cutest! They come on an info card and measure about 1.5" at the widest point.
Modeled after Leigh Anne Thompson's snowflake mug. These cloisonné enamel pins are the cutest! They come on an info card and measure about 1.5" at the widest point.
