Welcome to our new site. We hope you enjoy it. We are in our final testing to make sure everything is ready for you to come and SHOP. Look around all you like, we'll be officially open over here 12/26/24!
Used to trim pour hole waste, remove mold marks, carve and sculpt ceramics and greenware. F97 has a hard tempered steel blade with the same "springy" feel as most conventional blades. The F96 is a softer steel blade, with much more flexibility which allows it to bend. Both blades are 4" long and firmly set in a hardwood handle for a total length of 8".
Used to trim pour hole waste, remove mold marks, carve and sculpt ceramics and greenware. F97 has a hard tempered steel blade with the same "springy" feel as most conventional blades. The F96 is a softer steel blade, with much more flexibility which allows it to bend. Both blades are 4" long and firmly set in a hardwood handle for a total length of 8".
This special teardrop shaped foot, flat on the bottom, is perfect for pressing lace in place, in addition to the fine, sharp needle for placement. The foot is stainless steel with a hardwood handle for a total length of 6-3/4".
This heavy blunt needle for placement of the lace as well as a special teardrop shaped foot, flat on the bottom for pressing lace in place. The foot is stainless steel with a hardwood handle for a total length of 6-3/4"
This tool has a fine, sharp needle used for the placement of the lace as well as a blade curved with a point for pressing and cleanup. The blade is stainless steel with a hardwood handle for a total length of 6-3/4".
These tools present a variety of shapes and sizes of blades to accommodate the ordinary as well as the intricate cleanup job. All blades are made from high quality stainless steel with a double edge keenly sharpened.
Used for modeling in soft clay, cleaning seam lines, cutting and restoring detail. This unfinished all-wood tool has a sharp point at one end, a flat and square on the other, and 7-1/2" total in length.
Use both blades for smoothing those hard to reach areas of your pieces as well as trimming and cleanup. Blades are made from stainless steel, making this tool 8-1/2" total in length.
It cleans it all! Use the large end for cleaning large hole and vase openings, and the small end for the small, delicate areas in greenware, such as openings in figurines, teacup handles, lace patterns, and more. Use this brush (or Spoolie) to clean your own brushes, and the Fluid Writer wells.
The set contains five of the most popular DS Series tools (D1, D2, D3, D7, D10). These 6", .035 diameter wire end tools provide the potter and sculptor with a series of shapes designed for light cutting and slicing as well as removing controlled amounts and shapes of clay. Diameter of balls on each end: 0.072" and 0.114"
A necessity for all potters, this 1-15/16" long, thin heat-treated steel needle makes a clean smooth cut with a minimum of drag when removing the uneven top edge of thrown items.
These tools present a variety of shapes and sizes of blades to accommodate the ordinary as well as the intricate cleanup job. All blades are made from high quality stainless steel with a double edge keenly sharpened.
These tools present a variety of shapes and sizes of blades to accommodate the ordinary as well as the intricate cleanup job. All blades are made from high quality stainless steel with a double edge keenly sharpened.
These special blades will cut in any direction that pressure is applied. The high carbon steel saw is firmly set into a hardwood handle for a total length of 5-3/8". The K32 is a heavy duty saw used for cutting out designs in thick-walled greenware.
Cut through and remove the uneven top edge of wheel- thrown items. The large 1-15/16" (49mm) long, sharp, heat-treated steel needle is set in a 1/2" diameter hard- wood handle for a sturdy grip.
Used to cut heavy clay strips, designs, and holes, this tool is used with many art mediums for a wide variety of uses - too many to name! This 6-5/8" long tool has a sharp steel needle and is firmly set in a textured aluminum handle providing a firm grip for wet hands.
Ideal for fine cuts on greenware, leather work, stenciling and more. This all purpose cutting tool has interchangeable parts with other, standard, utility knives. The surgically sharp blade is held firmly with a four-jaw chuck, releasable, handle. This knife has a textured aluminum handle for a sure grip with wet hands.
Hand-Forged Scraper Tool (Double-Ended) Professional Series This double-end tool has fine serrated teeth on one end and coarse teeth on the other. It is made from high-grade stainless steel and hand-forged to create a solid unbreakable tool. Set in bright-colored rubber for comfort and secure gripping, it is fun to use, easy to find and won’t roll off the table. It is great for cutting, slicing, scoring, scraping, texturing, refining, shaping and removing clay.
Sgraffito & Detailing Set (Double-Ended) Professional Series The seven most practical and versatile tools for your sgrafitto and detailing needs. Each tool is made from solid piece of high-grade stainless steel and hand crafted in a variety of popular shapes with a precise cutting edge. With a rubber handle for a comfortable, secure grip, these tools are also great for intricate carving, cutting, and refining of detail. Set contains: 7 tools
Hand-Forged Needle and Scoring Tool (Double-Ended) Professional Series Two tools in one! Each tool is made from high-grade stainless steel and hand-forged to create a solid tool with a sharp needle in one end and a scoring tool on other end. Set in bright color rubber for a comfortable, secure grip, they are fun to use, easy to find and won’t roll off the table. They are also great for cutting, scoring, removing clay and all your hand-building needs. Since there are no glued or assembled parts, these tools made for life.
The Xiem retractable scoring tool provides an ergonomic solution to scoring and storing. The 6 sharp tines ensure depth and precision of scoring marks with little pressure but are efficiently retracted back into the plastic sheath for safety when not in use.
One of Chris Burke's top 5 favorites!Everyone wants this scalpel. It's lightweight, easy to use, and surgically sharp! Don't let the low price and disposable look fool you, our customers tell us that these wonderful little knives last much longer than expected.
This tool makes the right size hole in greenware salt and pepper shakers. Double-ended, it has high carbon steel drills firmly set in a hardwood handle for a total length of 6 3/4".
Provide an easy method for cutting clean holes in wet thick-wall greenware and wet clay. All five sizes can be used to achieve a variety of designs. All of these hole cutters have sharp, polished brass, cutting tubes with the smaller sizes firmly set in hardwood handles. The two larger tubes have ends covered with a rubber cap for comfort.
HC1 = 3/16" diameter x 5-3/4" long
HC1A = 1/4" diameter x 5-3/8" long
HC2 = 5/16" diameter x 5" long
HC3 = 1/2" diameter x 6-1/2" long
HC4 = 7/8" diameter x 6-1/2" long
Ideal for cutting out windows. These cutters are de- signed with push out plungers to remove clay from tube. Made of high quality brass with rubbertips on the plunger for comfort.
HCS1 (red capped) = 3/32" diameter
HCS2 (blue capped) = 1/8" diameter
HCS3 (yellow capped) = 3/16" diameter
HCS4 (black capped) = 1/4" diameter
X-Bevel is a clay tool that is designed for a quick and precise cutting of clay at 45, 30 and 60-degree angles. It is a must-have hand-building tool for all potters.
