Welcome to our new site. We hope you enjoy it. We are in our final testing to make sure everything is ready for you to come and SHOP. Look around all you like, we'll be officially open over here 12/26/24!
Solar Flare is a highly fluid light brown glaze with an iridescent crystalline surface. Opaque and glossy with a slight texture on the crystals. Apply to: Cone 04 Bisqueware Number of coats: 4 coats This glaze performs best at cone 6 but can be fired to cone 5. For best results, leave the inside or back of the form unglazed. Can be fired in a normal medium-speed firing with no special cooling schedule required. To take this glaze to the next level, use a controlled cooling schedule for increased crystal growth. These glazes are prone to running so we recommend stopping your glaze about half an inch above the foot. You can also use a drip tray or soft bricks to protect kiln shelves.
Firing schedule:
Cone 5 = 1184 °C (at 150°C/hour for the final 100°C of firing) / 2201°F ( at 270°F/hour in the final 200°F of firing)
Cone 6 = 1241°C (at 150°C/hour for the final 100°C of firing) / 2266°F ( at 270°F/hour in the final 200°F of firing)
Supernova is a highly fluid creamy white translucent glaze with a crystalline surface like frost on a window. The gloss glaze surface is opalescent and breaks slightly more cream than white. Apply to: Cone 04 Bisqueware Number of coats: 4 coats This glaze performs best at cone 5 but can be fired to cone 6. For best results, leave the inside or back of the form unglazed. Can be fired in a normal medium-speed firing with no special cooling schedule required. To take this glaze to the next level, use a controlled cooling schedule for increased crystal growth These glazes are prone to running so we recommend stopping your glaze about half an inch above the foot. You can also use a drip tray or soft bricks to protect kiln shelves.
Firing schedule:
Cone 5 = 1184 °C (at 150°C/hour for the final 100°C of firing) / 2201°F ( at 270°F/hour in the final 200°F of firing)
Cone 6 = 1241°C (at 150°C/hour for the final 100°C of firing) / 2266°F ( at 270°F/hour in the final 200°F of firing)
Satin Matte Goldenrod is an opaque, warm yellow glaze like a summer flower. This glaze likes to hug the edges, accentuating texture. Safety Warning Tableware producers must test all finished ware to establish dinnerware status, due to possible variations in firing temperature and contamination.
Satin Matte Cayenne is a semi-opaque, spicy red glaze with an earthy tone that resembles terracotta. It breaks slightly over the edges, accentuating textured ware while maintaining a clean appearance. Safety Warning Tableware producers must test all finished ware to establish dinnerware status, due to possible variations in firing temperature and contamination.
Satin Matte Moss is an opaque, olive green glaze resembling dark, meadowy moss, as the name suggests. This glaze likes to hug the edges, accentuating texture. Safety Warning Tableware producers must test all finished ware to establish dinnerware status, due to possible variations in firing temperature and contamination.
Satin Matte Seafoam is a semi-opaque, aqua glaze that evokes a sense of tranquility like an ocean breeze. It breaks gently over edges, accentuating textured ware while maintaining a silky, clean appearance. Safety Warning Tableware producers must test all finished ware to establish dinnerware status, due to possible variations in firing temperature and contamination.
Satin Matte Marble is a semi-opaque, pale gray glaze with just a whisper of color. It breaks over edges and enhances textured ware while possessing a classic overall look. Safety Warning Tableware producers must test all finished ware to establish dinnerware status, due to possible variations in firing temperature and contamination.
Satin Matte Stone is an opaque taupe glaze that looks and feels as smooth as the perfect skipping stone. When applied over texture, it breaks over the edges while retaining its smooth appearance. Safety Warning Tableware producers must test all finished ware to establish dinnerware status, due to possible variations in firing temperature and contamination.
Get a glimpse of the stunning C-52 Red Rock! This playful glaze from Amaco's Celadon series boasts a vibrant red color with a dreamy translucent finish. Perfect for adding a touch of whimsy to your pottery creations.
Step up your pottery game with C-33 Sandalwood from Amaco's Celadon series. This translucent glaze has a touch of sophistication but keeps things playful with its unique salmon shade. Make a statement with every piece!
Dip into the blue with C-26 Lagoon! Featuring a light, translucent glaze from amaco celadon line, this quirky product will add a playful touch to your pottery. Dive into the benefits of a unique, one-of-a-kind lagoon blue finish.
Get ready to add some quirky charm to your space with our C-24 Succulent! This beautiful green translucent amaco celadon glaze adds a unique touch to any piece. No watering needed (but maybe a little extra attention for its beauty)!
Cone 06 oxidation (first photo): Bottle Green is an iridescent dark green glaze that breaks a darker green. Semi-Transparent at 3 coats.
Cone 6 oxidation (second photo): Color turns olive. Enhanced mobility. Surface issues may occur.
TIP: Not overglaze compatible.
Cone 06 oxidation (first photo): Foliage Green is a glossy yellow green glaze, that breaks a darker yellow-green. Semi-Transparent at 3 coats.
Cone 6 oxidation (second photo): Color darkens. Enhanced mobility. Surface issues may occur.
TIP: Not overglaze compatible.
Cone 06 oxidation (first photo): Emerald Green is a glossy, dark blue green glaze, that breaks a darker green. Semi-Transparent at 3 coats
Cone 6 oxidation (second photo): Color darkens to green. Enhanced mobility. Surface issues may occur.
TIP: Not overglaze compatible.
Cone 06 oxidation (first photo): Pine Needles is a glossy, rust brown, that breaks a yellow-green. Semi-Transparent at 2 – 3 coats.
Cone 6 oxidation (second photo): Color changes to brown. Enhanced mobility. Surface issues may occur.
TIP: Not overglaze compatible.
Cone 06 oxidation (first photo): Leaf Green is a glossy, dark yellow-green glaze that breaks a darker green. Semi-Transparent at 3 coats.
Cone 6 oxidation (second photo): Color darkens. Enhanced mobility. Surface issues may occur.
TIP: Not overglaze compatible.
Cone 06 oxidation (first photo): Bluegrass is a glossy, deep blue-green glaze that breaks a darker, green. Semi-Transparent at 3 coats.
Cone 6 oxidation (second photo): Color turns green. Enhanced mobility. Surface issues may occur.
TIP: Not overglaze compatible.
Cone 06 oxidation (first photo): Holiday Green is a glossy, deep yellow-green glaze that breaks a darker green. Semi-Transparent at 3 coats.
Cone 6 oxidation (second photo): Color darkens. Enhanced mobility. Surface issues may occur.
TIP: Not overglaze compatible.
Cone 06 oxidation (first photo): Sea Mist is a glossy, pale blueish teal green glaze that breaks a darker, blueish green. Semi-Transparent at 3 coats.
Cone 6 oxidation (second photo): Color lightens. Enhanced mobility. Surface issues may occur.
TIP: Not overglaze compatible.
Cone 06 oxidation (large photo): Caribbean Blue is a glossy, ocean blue glaze that breaks a darker blue. Semi-Transparent at 3 coats. Cone 6 oxidation (small photo): Color turns teal. Enhanced mobility. Surface issues may occur. Tip: Not overglaze compatible.
Cone 06 oxidation (first photo): Denim blue is a glossy, blueish gray glaze with the look of denim that has fine dark blue specks. Semi-Transparent at 2 – 3 coats..
Cone 6 oxidation (second photo): No color change. Enhanced mobility. Surface issues may occur.
TIP: Overglaze compatible.
Cone 06 oxidation (first photo): Bright orange sheer gloss glaze adds color to your work and allows surface textures or design to show through.
Cone 6 oxidation (second photo): No color change.
Cone 06 oxidation (first photo): Cream gloss glaze with brown flecks adds color to your work and allows surface textures or design to show through.
Cone 6 oxidation (second photo): Color and specks lighten.
Cone 06 oxidation (first photo): Deep blue sheer gloss glaze adds color to your work and allows surface textures or design to show through.
Cone 6 oxidation (second photo): No color change.
Cone 06 oxidation (first photo): Light Turquoise sheer gloss glaze adds color to your work and allows surface textures or design to show through.
Cone 6 oxidation (second photo): Color lightens.
Cone 06 oxidation (first photo): Bright pink sheer gloss glaze adds color to your work and allows surface textures or design to show through.
Cone 6 oxidation (second photo): Color fades to clear.
Cone 06 oxidation (first photo): Celadon sheer gloss glaze adds color to your work and allows surface textures or design to show through.
Cone 6 oxidation (second photo): Color fades to clear.
Cone 06 oxidation (first photo): Deep purple sheer gloss glaze adds color to your work and allows surface textures or design to show through.
Cone 6 oxidation (second photo): Color turns blue.
Cone 06 oxidation (first photo): Bright red sheer gloss glaze adds color to your work and allows surface textures or design to show through.
Cone 6 oxidation (second photo): No color change.
Cone 06 oxidation (first photo): Bright yellow sheer gloss glaze adds color to your work and allows surface textures or design to show through.
Cone 6 oxidation (second photo): Color lightens.
Cone 06 oxidation (first image): Grape Expectations is a heavily pigmented, viscous Stroke & Coat®glaze that can be used for brush strokes or opaque coverage. One coat will create a translucent finish with subsequent coats adding opacity. We suggest two to three coats for full opacity and all over coverage. Will fire to a gloss finish without clear glaze.
Cone 6 oxidation (second image): Semi-transparent. Color turns blue.
Cone 10 Reduction (third image)
Cone 06 oxidation (first image): Lavendear is a heavily pigmented, viscous Stroke & Coat®glaze that can be used for brush strokes or opaque coverage. One coat will create a translucent finish with subsequent coats adding opacity. We suggest two to three coats for full opacity and all over coverage. Will fire to a gloss finish without clear glaze.
Cone 6 oxidation (second image): Semi-opaque. No color change.
Cone 10 reduction (third image)
Cone 06 oxidation (first image): Just Peachy is a heavily pigmented, viscous Stroke & Coat®glaze that can be used for brush strokes or opaque coverage. One coat will create a translucent finish with subsequent coats adding opacity. We suggest two to three coats for full opacity and all over coverage. Will fire to a gloss finish without clear glaze.
Cone 6 oxidation (second image): Opaque. No color change.
Cone 10 reduction (third image)
Cone 06 oxidation (first image): Spruce It Up is a heavily pigmented, viscous Stroke & Coat®glaze that can be used for brush strokes or opaque coverage. One coat will create a translucent finish with subsequent coats adding opacity. We suggest two to three coats for full opacity and all over coverage. Will fire to a gloss finish without clear glaze.
Cone 6 oxidation (second image): Semi-opaque. No color change.
Cone 10 reduction (third image)
