Welcome to our new site. We hope you enjoy it. We are in our final testing to make sure everything is ready for you to come and SHOP. Look around all you like, we'll be officially open over here 12/26/24!
The Xiem X-Sponge™ is not your ordinary "sponge-on-a-stick." The stainless steel rod telescopes from a shallow 8.5" all the way to 23", making sure you'll never have water in the bottom of your pots ever again! X-Sponge II features a replacement sponge head. It is completely redesigned - both internal and external structures. The stainless steel telescopic handle with a secure rubber grip has a male thread at its end and a sponge head has the female thread which making the replacement sponge effortlessly. X-Sponge is a trademark of Xiem Studio, LLC.
The rollers are beveled carved, allowing them to release easily from clay. The Boogie Woogie Long Hand roller also works great on slabs. Simply roll the LHR roller with your hand across the clay to create a beautiful pattern. The ends of the roller are rounded to allow patterns to blend with multiple rolls. MKM wood tools are finished with oil to ensure durability over many years of use. The rollers are easily cleaned with water and a soft toothbrush. As with all wood tools, don’t let them sit in water for long periods.
This stylus has a very small and delicate wire used for incising, creating various size furrows and detailing small areas. The total length is 6" making this tool a perfect fit for small detail work.
All rollers are made of a fine-grained hard wood and treated with teng oil for durability. All RS, RM, and RL rollers fit into the same handle, RH-1, and can be easily and quickly changed out for a roller with a different design or width. Both sizes of the Mini Rollers fit the same small handle, RH-2, and can also quickly be changed out for a roller with a different Mini Roller design.
An extremely soft, super absorbent and long-lasting chamois sponge. Tapered edges give fine control for working with either porcelain or stoneware clay. Use the finishing sponge for adding final refinements to any clay body.
LHR HandRollers are 20 cm (7.9 inches) long and 2.5 cm (1 inch) in diameter. The rollers are beveled carved, allowing them to release easily from clay. The Boogie Woogie Long Hand roller also works great on slabs. Simply roll the LHR roller with your hand across the clay to create a beautiful pattern. The ends of the roller are rounded to allow patterns to blend with multiple rolls. MKM wood tools are finished with oil to ensure durability over many years of use. The rollers are easily cleaned with water and a soft toothbrush. As with all wood tools, don’t let them sit in water for long periods.
All rollers are made of a fine-grained hard wood and treated with teng oil for durability. All RS, RM, and RL rollers fit into the same handle, RH-1, and can be easily and quickly changed out for a roller with a different design or width. Both sizes of the Mini Rollers fit the same small handle, RH-2, and can also quickly be changed out for a roller with a different Mini Roller design.
The Xiem retractable scoring tool provides an ergonomic solution to scoring and storing. The 6 sharp tines ensure depth and precision of scoring marks with little pressure but are efficiently retracted back into the plastic sheath for safety when not in use.
LHR HandRollers are 20 cm (7.9 inches) long and 2.5 cm (1 inch) in diameter. The rollers are beveled carved, allowing them to release easily from clay. The Boogie Woogie Long Hand roller also works great on slabs. Simply roll the LHR roller with your hand across the clay to create a beautiful pattern. The ends of the roller are rounded to allow patterns to blend with multiple rolls. MKM wood tools are finished with oil to ensure durability over many years of use. The rollers are easily cleaned with water and a soft toothbrush. As with all wood tools, don’t let them sit in water for long periods.
Used for cutting, slicing, smoothing, contouring, and pattern decorating in soft clay. These series of wood tools offers a wide variety of shapes and contours for basic clay modeling. They have a satin smooth finish with a rigid manufacturing process to assure consistent quality and form. Made in the USA from imported hardwood. 6" long.
Used to remove controlled amounts of clay from wheel-thrown and sculpture pieces. The shaped cutting heads are made from heavy stainless steel ribbon with sharpened edges. Each tool, with its rugged hardwood handle, ensures a sure grip and easy manipulation in wet clay.
All rollers are made of a fine-grained hard wood and treated with teng oil for durability. All RS, RM, and RL rollers fit into the same handle, RH-1, and can be easily and quickly changed out for a roller with a different design or width. Both sizes of the Mini Rollers fit the same small handle, RH-2, and can also quickly be changed out for a roller with a different Mini Roller design.
Long and lean, these Platter Ribs were designed to give good compression when you are making plates and platters enabling you to properly compress the clay and avoid those cracks that sometimes develop. They are made with a stiff polymer but still offer some flexibility. The Small one is particularly good for making shallow pasta-style bowls.
Xiem Studio Tools innovative peel-and-stick self-adhesive foam trimming bat is ideal for trimming large bowls and plates without the use of a coil to attach the piece to the wheel head. The foam bat sticks firmly to all types of 14" wood and plastic bats. Once applied to the bat, its surface grips the rims of leather hard pieces and holds them in place for trimming. Items can be easily centered using the concentric rings.
All rollers are made of a fine-grained hard wood and treated with teng oil for durability. All RS, RM, and RL rollers fit into the same handle, RH-1, and can be easily and quickly changed out for a roller with a different design or width. Both sizes of the Mini Rollers fit the same small handle, RH-2, and can also quickly be changed out for a roller with a different Mini Roller design.
Just the answer for your fine sculpting, detailing and trimming requirements. These miniature sculpting tools are made of fine ribbon steel, heat treated for maximum strength. Firmly set in 1/4” diameter by 5” aluminum handle, these tools are ideal for working with clay, greenware, wax, plaster, modeling mediums, and even bread dough. Available as a set, (MRS) or individually.
All rollers are made of a fine-grained hard wood and treated with teng oil for durability. All RS, RM, and RL rollers fit into the same handle, RH-1, and can be easily and quickly changed out for a roller with a different design or width. Both sizes of the Mini Rollers fit the same small handle, RH-2, and can also quickly be changed out for a roller with a different Mini Roller design.
Just the answer for your fine sculpting, detailing and trimming requirements. These miniature sculpting tools are made of fine ribbon steel, heat treated for maximum strength. Firmly set in 1/4” diameter by 5” aluminum handle, these tools are ideal for working with clay, greenware, wax, plaster, modeling mediums, and even bread dough. Available as a set, (MRS) or individually.
Used for smoothing and cleanup of ceramics and pottery pieces and sanding off roughness created by porcelain dust. This 4" rectangular, 1/2" thick, soft sponge is coated on one side with 220 grit abrasive material.
All rollers are made of a fine-grained hard wood and treated with teng oil for durability. All RS, RM, and RL rollers fit into the same handle, RH-1, and can be easily and quickly changed out for a roller with a different design or width. Both sizes of the Mini Rollers fit the same small handle, RH-2, and can also quickly be changed out for a roller with a different Mini Roller design.
Used for cutting, slicing, smoothing, contouring, and pattern decorating in soft clay. These series of wood tools offers a wide variety of shapes and contours for basic clay modeling. They have a satin smooth finish with a rigid manufacturing process to assure consistent quality and form. Made in the USA from imported hardwood. 6" long.
Used for light cutting, slicing and shaping, these 6" double-ended ribbon tools come in a wide variety of shapes. The ends are formed from high-carbon heat-treated steel and are firmly attached to hardwood handles. Set includes R1-R5.
All rollers are made of a fine-grained hard wood and treated with teng oil for durability. All RS, RM, and RL rollers fit into the same handle, RH-1, and can be easily and quickly changed out for a roller with a different design or width. Both sizes of the Mini Rollers fit the same small handle, RH-2, and can also quickly be changed out for a roller with a different Mini Roller design.
Used for cutting, slicing, smoothing, contouring, and pattern decorating in soft clay. These series of wood tools offers a wide variety of shapes and contours for basic clay modeling. They have a satin smooth finish with a rigid manufacturing process to assure consistent quality and form. Made in the USA from imported hardwood. 8" long.
All rollers are made of a fine-grained hard wood and treated with teng oil for durability. All RS, RM, and RL rollers fit into the same handle, RH-1, and can be easily and quickly changed out for a roller with a different design or width. Both sizes of the Mini Rollers fit the same small handle, RH-2, and can also quickly be changed out for a roller with a different Mini Roller design.
One of Jeanette Oliver's top 5 favorites! Used for shaping, smoothing and trimming pottery shapes. The steel scrapers (S) are made from thin flexible spring stainless steel. The S11S and S12 are slightly heavier gauge steel, making them somewhat stiffer. The aluminum scrapers (SA) are made from a high-strength aircraft alloy that is much more rigid. The rigid scrapers can also be used as a squeegee to remove excess water from pottery shapes.
All rollers are made of a fine-grained hard wood and treated with teng oil for durability. All RS, RM, and RL rollers fit into the same handle, RH-1, and can be easily and quickly changed out for a roller with a different design or width. Both sizes of the Mini Rollers fit the same small handle, RH-2, and can also quickly be changed out for a roller with a different Mini Roller design.
Used for cutting, slicing, smoothing, contouring, and pattern decorating in soft clay. These series of wood tools offers a wide variety of shapes and contours for basic clay modeling. They have a satin smooth finish with a rigid manufacturing process to assure consistent quality and form. Made in the USA from imported hardwood. 6" long.
All rollers are made of a fine-grained hard wood and treated with teng oil for durability. All RS, RM, and RL rollers fit into the same handle, RH-1, and can be easily and quickly changed out for a roller with a different design or width. Both sizes of the Mini Rollers fit the same small handle, RH-2, and can also quickly be changed out for a roller with a different Mini Roller design.
All rollers are made of a fine-grained hard wood and treated with teng oil for durability. All RS, RM, and RL rollers fit into the same handle, RH-1, and can be easily and quickly changed out for a roller with a different design or width. Both sizes of the Mini Rollers fit the same small handle, RH-2, and can also quickly be changed out for a roller with a different Mini Roller design.
Used for shaping, smoothing and trimming pottery shapes. The steel scrapers (S) are made from thin flexible spring stainless steel. The S11S and S12 are slightly heavier gauge steel, making them somewhat stiffer. The aluminum scrapers (SA) are made from a high-strength aircraft alloy that is much more rigid. The rigid scrapers can also be used as a squeegee to remove excess water from pottery shapes.
Used for shaping, smoothing and trimming pottery shapes. The steel scrapers (S) are made from thin flexible spring stainless steel. The S11S and S12 are slightly heavier gauge steel, making them somewhat stiffer. The aluminum scrapers (SA) are made from a high-strength aircraft alloy that is much more rigid. The rigid scrapers can also be used as a squeegee to remove excess water from pottery shapes.
All rollers are made of a fine-grained hard wood and treated with teng oil for durability. All RS, RM, and RL rollers fit into the same handle, RH-1, and can be easily and quickly changed out for a roller with a different design or width. Both sizes of the Mini Rollers fit the same small handle, RH-2, and can also quickly be changed out for a roller with a different Mini Roller design.
Used for shaping, smoothing and trimming pottery shapes. The steel scrapers (S) are made from thin flexible spring stainless steel. The S11S and S12 are slightly heavier gauge steel, making them somewhat stiffer. The aluminum scrapers (SA) are made from a high-strength aircraft alloy that is much more rigid. The rigid scrapers can also be used as a squeegee to remove excess water from pottery shapes.
All rollers are made of a fine-grained hard wood and treated with teng oil for durability. All RS, RM, and RL rollers fit into the same handle, RH-1, and can be easily and quickly changed out for a roller with a different design or width. Both sizes of the Mini Rollers fit the same small handle, RH-2, and can also quickly be changed out for a roller with a different Mini Roller design.
Used for shaping, smoothing and trimming pottery shapes. The steel scrapers (S) are made from thin flexible spring stainless steel. The S11S and S12 are slightly heavier gauge steel, making them somewhat stiffer. The aluminum scrapers (SA) are made from a high-strength aircraft alloy that is much more rigid. The rigid scrapers can also be used as a squeegee to remove excess water from pottery shapes.