Marking Dot is a decorating disk and trimming wheel in one. The decorating disk has a measurement around the circumference for a quick and easy reference guide to create your marking divisions for decorating designs. It includes the most popular even and odd diagram divisions for your convenience. It is also an excellent tool to support all wheel trimming needs. It is made with precision-machined aluminum wheels and stainless-steel ball bearings for smooth rotation, along with an accurate measurement imprinted on the clear plastic disk. Available in small, medium, and large disk sizes.
Each RD2 Form has a soft rounded edge, 2" spacing from base to rim, and 3/4" depth.
Clay should be left on the RD2 forms until stiff, leather-hard.
The RD2 Oval 7x10" Form is perfect for making salad plates or trinket dishes.
The RD2 Oval 9x12" Form is a great size for making large dinner plates and serving trays.
The RD2 Oval 11x14" Form is perfect for making large platters and serving trays
Take a look at the videos below (or check out all of the videos on the GR Pottery Form YouTube channel) to learn some tricks and tips on how to use the GR Pottery Form Molds.
Xiem Studio Tools innovative peel-and-stick self-adhesive foam trimming bat is ideal for trimming large bowls and plates without the use of a coil to attach the piece to the wheel head. The foam bat sticks firmly to all types of 14" wood and plastic bats. Once applied to the bat, its surface grips the rims of leather hard pieces and holds them in place for trimming. Items can be easily centered using the concentric rings.
GR Pottery Forms are wood drape molds ideal for making dinnerware and serving platters. They are cut and beveled fiberboard which make them durable and economical. Easy to use over and over again giving you a tool to create your personalized shallow objects. Jeff has used them for 10 years to create his production line and now is offering them to you. But remember they are wood. They will not last as long if they are left in a wet condition for over a 24 hour period. The timing of making them and removing the pieces from the slab is very similar to plaster. Ship really well and can be easily stored in a dry space. No release agent, cleaning or sealing necessary. Try the "Foot Maker" tool to smooth and shape slab feet or edges. 3" Square spacers are available seperately and can be used to lift the molds off the surface of the table after draping the slab so modifications can be made to the edges. Take a look at the videos below (or check out all of the videos on the GR Pottery Form YouTube channel) to learn some tricks and tips on how to use the GR Pottery Form Molds.
Xiem Batmate™ is the perfect solution for annoying bat jitter and warping. Place Batmate™ below your problem bats on the wheel and instantly your warped bats become stable. It is also great for trimming bowls and plates. We at Xiem love ours, and we guarantee you'll love Batmate™ too.
The 4" extruder dies are made of 1/2" HDPE (High Density polyethylene), which is extremely wear-resistant and completely non-contaminating. The top edge of the die cavity is beveled to compact the clay as it passes through, giving a crisp, more solid extrusion. In the hollow dies, there is a bevel on both the interior and exterior portions under each side of the bracket (which holds the center of the hollow dies) that helps the extrusion to "heal" after is has been cut apart by the bracket. This bracket fits into a slot machined into the top of the hollow die and is held in place by the barrel of the extruder. If a hollow die is mounted in place, the center part of the die is in exactly the right place and the wall thickness will automatically be even all the way around. In general, the walls of extrusions 3-1/2" OD or less are 1/4" thick, while larger pieces have 5/16" walls. We have a selection of stock 4” dies available & custom dies are quickly made and inexpensive.
The die mask, made of 1/8" flexible neoprene, is used to block three cavities of a die that has four openings. One is supplied with every North Star 4” extruder. The 4" extruder dies are made of 1/2" HDPE (High Density polyethylene). Which is extremely wear-resistant and completely non-contaminating. The top edge of the die cavity is beveled to compact the clay as it passes through, giving a crisp, more solid extrusion. In the hollow dies, there is a bevel on both the interior and exterior portions under each side of the bracket (which holds the center of the hollow dies) that helps the extrusion to "heal" after is has been cut apart by the bracket. This bracket fits into a slot machined into the top of the hollow die and is held in place by the barrel of the extruder. If a hollow die is mounted in place, the center part of the die is in exactly the right place and the wall thickness will automatically be even all the way around. In general, the walls of extrusions 3-1/2 inches OD or less are 1/4 inch thick, while larger pieces have 5/16 inch walls. We have a selection of stock 4” dies available & custom dies are quickly made and inexpensive.
GR Pottery Forms are wood drape molds ideal for making dinnerware and serving platters. They are cut and beveled fiberboard which make them durable and economical. Easy to use over and over again giving you a tool to create your personalized shallow objects. Jeff has used them for 10 years to create his production line and now is offering them to you. But remember they are wood. They will not last as long if they are left in a wet condition for over a 24 hour period. The timing of making them and removing the pieces from the slab is very similar to plaster. Ship really well and can be easily stored in a dry space. No release agent, cleaning or sealing necessary. Try the "Foot Maker" tool to smooth and shape slab feet or edges. 3" Square spacers are available seperately and can be used to lift the molds off the surface of the table after draping the slab so modifications can be made to the edges. Take a look at the videos below (or check out all of the videos on the GR Pottery Form YouTube channel) to learn some tricks and tips on how to use the GR Pottery Form Molds.
GR Pottery Forms are wood drape molds ideal for making dinnerware and serving platters. They are cut and beveled fiberboard which make them durable and economical. Easy to use over and over again giving you a tool to create your personalized shallow objects. Jeff has used them for 10 years to create his production line and now is offering them to you. But remember they are wood. They will not last as long if they are left in a wet condition for over a 24 hour period. The timing of making them and removing the pieces from the slab is very similar to plaster. Ship really well and can be easily stored in a dry space. No release agent, cleaning or sealing necessary. Try the "Foot Maker" tool to smooth and shape slab feet or edges. 3" Square spacers are available seperately and can be used to lift the molds off the surface of the table after draping the slab so modifications can be made to the edges. Take a look at the videos below (or check out all of the videos on the GR Pottery Form YouTube channel) to learn some tricks and tips on how to use the GR Pottery Form Molds.
GR Pottery Forms are wood drape molds ideal for making dinnerware and serving platters. They are cut and beveled fiberboard which make them durable and economical. Easy to use over and over again giving you a tool to create your personalized shallow objects. Jeff has used them for 10 years to create his production line and now is offering them to you. But remember they are wood. They will not last as long if they are left in a wet condition for over a 24 hour period. The timing of making them and removing the pieces from the slab is very similar to plaster. Ship really well and can be easily stored in a dry space. No release agent, cleaning or sealing necessary. Try the "Foot Maker" tool to smooth and shape slab feet or edges. 3" Square spacers are available seperately and can be used to lift the molds off the surface of the table after draping the slab so modifications can be made to the edges. Take a look at the videos below (or check out all of the videos on the GR Pottery Form YouTube channel) to learn some tricks and tips on how to use the GR Pottery Form Molds.
The Hydro-Bat is made of Hydro-Stone, a USG product containing cement and crystalline silica, that is 8 to 10 times stronger then pottery plaster. The surface is scratch resistant yet absorbs water like plaster eliminating the need to cut your pieces off the bat with a wire.
The Hydro-Bat was designed to fit on wheel heads that have bat pins spaced 10 inches apart on center. The hard rubber grommets cast into the underside of each Hydro-Bat will not swell or change shape and are sized to fit over a 3/8" diameter bat pin head. Due to their smaller diameter, the grommets under the 8.5 and 10" Hydro-Bat's are spaced 6" apart and require the HBA Adapter to convert standard 10 inch pins to 6 inches. This adapter is made of sturdy polyethelene plastic and fits snuggly over the 10" bat pins on your wheel head. It has two upfacing 3/8" diameter bat pins fused in at 6” apart. The 8.5" & 10" Hydro-Bats fit onto these pins. If you have a wheel head with pins positioned at 9" apart we make Adapter HB9A which will allow you to use our bats. If you don't have bat pins in your wheel, no problem, our product works great with a bat gripper or grabber which allows you to attach any kind of bat to a wheel head. Custom adapters can be made for any size wheel head or pin configuration. The smaller Hydro-Bats (8.5” and 10” diameter) are perfect for maximizing your space when you throw smaller forms, such as bowls or mugs; because the grommets on these bats is just 6” apart, there's an adapter to make sure that they will fit onto any wheel. The smallest Hydro-Bat measures just 6” in diameter, and requires the HB6A adapter, with grommets spaced 4’ apart. All of the adapters are made of sturdy polyethylene plastic, and will become a studio staple for you along with your Hydro-Bats! If you have a pottery wheel with no drilled bat pin holes, no problem! Many customers have used Hydro-Bats with a bat gripper with great success. **this item includes a $2 per Hydrobat surcharge for deliveries and shipments via UPS/USPS or freight companies to cover the extra packing material necessary for them to get to you safely. The surcharge is added to the shipping costs.
GR Pottery Forms are wood drape molds ideal for making dinnerware and serving platters. They are cut and beveled fiberboard which make them durable and economical. Easy to use over and over again giving you a tool to create your personalized shallow objects. Jeff has used them for 10 years to create his production line and now is offering them to you. But remember they are wood. They will not last as long if they are left in a wet condition for over a 24 hour period. The timing of making them and removing the pieces from the slab is very similar to plaster. Ship really well and can be easily stored in a dry space. No release agent, cleaning or sealing necessary. Try the "Foot Maker" tool to smooth and shape slab feet or edges. 3" Square spacers are available seperately and can be used to lift the molds off the surface of the table after draping the slab so modifications can be made to the edges. Take a look at the videos below (or check out all of the videos on the GR Pottery Form YouTube channel) to learn some tricks and tips on how to use the GR Pottery Form Molds.
Set includes:
(1) 5" Round(1) 6.5" Round(1) 8" Round(1) 9.5" Round(1) 11" RoundAll Round forms are pre-drilled for use with or without the WA.
GR Pottery Forms are wood drape molds ideal for making dinnerware and serving platters. They are cut and beveled fiberboard which make them durable and economical. Easy to use over and over again giving you a tool to create your personalized shallow objects. Jeff has used them for 10 years to create his production line and now is offering them to you. But remember they are wood. They will not last as long if they are left in a wet condition for over a 24 hour period. The timing of making them and removing the pieces from the slab is very similar to plaster. Ship really well and can be easily stored in a dry space. No release agent, cleaning or sealing necessary. Try the "Foot Maker" tool to smooth and shape slab feet or edges. 3" Square spacers are available seperately and can be used to lift the molds off the surface of the table after draping the slab so modifications can be made to the edges. Take a look at the videos below (or check out all of the videos on the GR Pottery Form YouTube channel) to learn some tricks and tips on how to use the GR Pottery Form Molds.
GR Pottery Forms are wood drape molds ideal for making dinnerware and serving platters. They are cut and beveled fiberboard which make them durable and economical. Easy to use over and over again giving you a tool to create your personalized shallow objects. Jeff has used them for 10 years to create his production line and now is offering them to you. But remember they are wood. They will not last as long if they are left in a wet condition for over a 24 hour period. The timing of making them and removing the pieces from the slab is very similar to plaster. Ship really well and can be easily stored in a dry space. No release agent, cleaning or sealing necessary. Try the "Foot Maker" tool to smooth and shape slab feet or edges. 3" Square spacers are available seperately and can be used to lift the molds off the surface of the table after draping the slab so modifications can be made to the edges.
Set contains: 2) 9.5" x 9.5" and (2) 6.5" x 6.5" forms, (4) spacers, foot maker
Take a look at the videos below (or check out all of the videos on the GR Pottery Form YouTube channel) to learn some tricks and tips on how to use the GR Pottery Form Molds.
Our OG Cutie Heart is a 4" Heart perfect for small trinket dishes, or pair with our larger OG Heart forms (available in 6", 8", and 10") to create a nesting set.
Each OG Form has a 45 degree angle edge, and 3/4" depth.
All Forms are measured in inches.
Speedball’s Plastic Bats have become the preferred choice for potters and art educators everywhere! Offering the ultimate in convenience, organization and performance, these bats feature an “Easy Lift Rim™” to make removing the bat from the wheel head in one fluid motion a BREEZE, leaving the ceramic piece undisturbed.
Made from injection-molded plastic, these bats are built to last and feature unique ribs that add strength and durability. Featuring universal bat pin spacing, these great bats are designed to fit all wheels and are offered at an unbeatable value. Available in (3) sizes, 14″ Round, 12″ Round and the hugely popular 7.5″ space-saving square, these essentials for your studio are available in (9) bold and bright colors (Green, Blue, Orange, Red, Brown, Black, Teal, Purple, and Pink).
StudioPro Tempered Hardboard Bats are the workhorses of the pottery studio. They are our most affordable bats, yet made from the finest quality tempered hardboard available. Unlike it's Masonite predecessor, our tempered hardboard has no added formaldehyde. StudioPro Tempered Hardboard Bats are slightly absorbent for good clay adhesion and bottom drying. They are compact and easy to store and will last many years if cared for properly. Hardboard bats are a great choice for the professional or hobbyist potter who uses many bats and has a controlled studio setting.
StudioPro Black Plastic Bats are a permanent solution to your bat needs. They’re easy to care for, extremely versatile, and a great choice for schools and art centers where pots are often left on bats for long periods of time. Our Plastic Bats are textured on both sides so clay adheres equally well on either surface: a true "two-sided" bat. They are cut from a high-quality marine grade High Density Polyethylene (HDPE), which is produced using a patented extrusion process. This ensures perfect flatness of every sheet and every bat! All bats are 1/4" thick EXCEPT for the 22" diameter bat which is 3/8" thick. The 8" and 10" bats work with the 12" bat adapter.