General Clay Tools
Kemper Tools Kemper BB Cleanup Tool
Use both blades for smoothing those hard to reach areas of your pieces as well as trimming and cleanup. Blades are made from stainless steel, making this tool 8-1/2" total in length.
$5.25
Kemper Tools Kemper CUB Clean-up Brush
It cleans it all! Use the large end for cleaning large hole and vase openings, and the small end for the small, delicate areas in greenware, such as openings in figurines, teacup handles, lace patterns, and more. Use this brush (or Spoolie) to clean your own brushes, and the Fluid Writer wells.
$7.49
Kemper Tools Kemper Round Hole Cutter
Provide an easy method for cutting clean holes in wet thick-wall greenware and wet clay. All five sizes can be used to achieve a variety of designs. All of these hole cutters have sharp, polished brass, cutting tubes with the smaller sizes firmly set in hardwood handles. The two larger tubes have ends covered with a rubber cap for comfort. HC1 = 3/16" diameter x 5-3/4" long HC1A = 1/4" diameter x 5-3/8" long HC2 = 5/16" diameter x 5" long HC3 = 1/2" diameter x 6-1/2" long HC4 = 7/8" diameter x 6-1/2" long
$4.85 - $12.35
Kemper Tools Kemper Brass Square Cutters
Ideal for cutting out windows. These cutters are de- signed with push out plungers to remove clay from tube. Made of high quality brass with rubbertips on the plunger for comfort. HCS1 (red capped) = 3/32" diameter HCS2 (blue capped) = 1/8" diameter HCS3 (yellow capped) = 3/16" diameter HCS4 (black capped) = 1/4" diameter
$6.45 - $9.45
Kemper Tools Kemper DBSL Large Double Ball Stylus
The set contains five of the most popular DS Series tools (D1, D2, D3, D7, D10). These 6", .035 diameter wire end tools provide the potter and sculptor with a series of shapes designed for light cutting and slicing as well as removing controlled amounts and shapes of clay. Diameter of balls on each end: 0.072" and 0.114"
$4.15
Kemper Tools Kemper DG1 Texturing Brush
The stiff, course bristles are designed for use on hard greenware. The brush is made with stainless steel wires firmly set in a hardwood handle for a total length of 6-1/2".
$6.49
Kemper Tools Kemper PCN Cut-off Needle
A necessity for all potters, this 1-15/16" long, thin heat-treated steel needle makes a clean smooth cut with a minimum of drag when removing the uneven top edge of thrown items.
$1.49
Dirty Girls Pottery Tools Dirty Girls Slab Bevel Tool
This is the ultimate handbuilding tool. It is basically 3 tools in one. You get 3 different angles with which you can bevel your slabs for construction. Place the tool flat on the table up against your slab and draw it along the slab to cut a perfect angle for construction. you get 30, 60, or 45 degree cuts. The taut wire never snags or causes drag or deformation on your slab. You can quickly and easily tighten or replace the wire too!
$28.00
Kemper Tools Kemper K23 Cleanup Tool
These tools present a variety of shapes and sizes of blades to accommodate the ordinary as well as the intricate cleanup job. All blades are made from high quality stainless steel with a double edge keenly sharpened.
$4.49
Kemper Tools Kemper K24 Cleanup Tool
These tools present a variety of shapes and sizes of blades to accommodate the ordinary as well as the intricate cleanup job. All blades are made from high quality stainless steel with a double edge keenly sharpened.
$5.19
Kemper Tools Kemper K31 Zig-Zag Saw
These special blades will cut in any direction that pressure is applied. The high carbon steel saw is firmly set into a hardwood handle for a total length of 5-3/8". The K32 is a heavy duty saw used for cutting out designs in thick-walled greenware.
$5.59
Kemper Tools Kemper PNH Heavy Duty Needle Tool
Cut through and remove the uneven top edge of wheel- thrown items. The large 1-15/16" (49mm) long, sharp, heat-treated steel needle is set in a 1/2" diameter hard- wood handle for a sturdy grip.
$2.59
Kemper Tools Kemper PRO Needle Tool
Used to cut heavy clay strips, designs, and holes, this tool is used with many art mediums for a wide variety of uses - too many to name! This 6-5/8" long tool has a sharp steel needle and is firmly set in a textured aluminum handle providing a firm grip for wet hands.
$3.55
Falcon Pottery Tools Whistle Making Tool
$1.20
Kemper Tools Kemper UK Utility Knife
Ideal for fine cuts on greenware, leather work, stenciling and more. This all purpose cutting tool has interchangeable parts with other, standard, utility knives. The surgically sharp blade is held firmly with a four-jaw chuck, releasable, handle. This knife has a textured aluminum handle for a sure grip with wet hands.
$6.69
Xiem Tools USA X-Bevel
X-Bevel is a clay tool that is designed for a quick and precise cutting of clay at 45, 30 and 60-degree angles. It is a must-have hand-building tool for all potters.
$10.95
Xiem Tools USA Double-End Stainless Steel Scraper Tool
Hand-Forged Scraper Tool (Double-Ended) Professional Series This double-end tool has fine serrated teeth on one end and coarse teeth on the other. It is made from high-grade stainless steel and hand-forged to create a solid unbreakable tool. Set in bright-colored rubber for comfort and secure gripping, it is fun to use, easy to find and won’t roll off the table. It is great for cutting, slicing, scoring, scraping, texturing, refining, shaping and removing clay.
$8.95
Xiem Tools USA Double-End Stainless Steel Needle & Scoring Tool
Hand-Forged Needle and Scoring Tool (Double-Ended) Professional Series Two tools in one! Each tool is made from high-grade stainless steel and hand-forged to create a solid tool with a sharp needle in one end and a scoring tool on other end. Set in bright color rubber for a comfortable, secure grip, they are fun to use, easy to find and won’t roll off the table. They are also great for cutting, scoring, removing clay and all your hand-building needs. Since there are no glued or assembled parts, these tools made for life.
$12.95
Xiem Tools USA Rectractable Scoring Tool
The Xiem retractable scoring tool provides an ergonomic solution to scoring and storing. The 6 sharp tines ensure depth and precision of scoring marks with little pressure but are efficiently retracted back into the plastic sheath for safety when not in use.
$7.50
Kemper Tools Kemper SCP Scalpel
One of Chris Burke's top 5 favorites!Everyone wants this scalpel. It's lightweight, easy to use, and surgically sharp! Don't let the low price and disposable look fool you, our customers tell us that these wonderful little knives last much longer than expected.
$2.45
Kemper Tools Kemper SPD Salt & Pepper Drill
This tool makes the right size hole in greenware salt and pepper shakers. Double-ended, it has high carbon steel drills firmly set in a hardwood handle for a total length of 6 3/4".
$7.69
Kemper Tools Kemper SWB (bent) Scratch Wire Brush
Many special effects that were difficult (and time consuming) are simple to achieve with a single tool. One stroke is all it takes to make multiple fine lines with these angled bristles. The heat-treated steel bristles are firmly set in a firm grip, textured aluminum handle for a total length of 5".
$5.09
Xiem Tools USA Potter's Clay Gauge - Caliper & Depth Measurement Tool
Potter’s Clay Gauge is a Potter’s Caliper and depth measurement tool in one. It is ideal for measuring inner, outer, and depth measurements for both thrown and hand-built clay works with precision. It provides dimension in inches and centimeters
$5.95
Sherrill Mudtools Fang Tool, Large
For when you really want to sink your teeth into your clay, grab all three small FANGS! Everyone’s clay is different. Some clays are fine, some are gritty. The FANG series of scoring tools allow you to find the right tooth size for the material you’re working on. All of our FANGS are made from cutlery grade stainless steel.
$12.50 - $37.50
Sherrill Mudtools Fang Tool, Small
For when you really want to sink your teeth into your clay, grab all three small FANGS! Everyone’s clay is different. Some clays are fine, some are gritty. The FANG series of scoring tools allow you to find the right tooth size for the material you’re working on. All of our FANGS are made from cutlery grade stainless steel.
$11.50 - $34.50
Sherrill Mudtools Small Bowl Polymer Rib
The Small Bowl Ribs are the little brother of the Large Bowl Ribs. They are designed to give as many radius sweeps on the clay as possible. They are smaller in the front and bigger in the back and are a workhorse of a rib, especially if you are throwing big pots. All of our Mudtools polymer pottery ribs are made of a unique flexible material that will not develop burrs or cracks under normal use. We’ve found that over time the rib becomes even more polished. Each polymer shape is available in a variety of hardness. Whether you are throwing clay on the wheel, hand building or sculpting, the pottery rib is a classic and essential tool. Because it acts as an extension of the potters own hand, we believe it should function well and be a joy to use. Whatever you want to make, Sherrill Mudtools has got you covered.
$13.00
Sherrill Mudtools Paisley Scraper Rib
Paisley Scraper Ribs prove themselves to be excellent in sculpting, shaping, and refining leather hard clay. The tight inside radius is good for working around joints (for example, at the inside of a teapot spout.) Made with cutlery grade stainless steel, it is available in three different edges: Smooth, 24 Teeth Extra Fine, and 18 Teeth Fine – you choose one to suit the job you want to tackle. We like to use the teeth to remove and shape clay and then follow up with a Polymer Rib to smooth and polish it.
$12.00 - $14.00
Sherrill Mudtools Long Scraper Rib
The Long Scraper Rib is available in four different edge styles: a Smooth edge, an Extra-Fine edge (24 teeth per inch), a Fine edge (18 teeth per inch), and a Regular edge (12 teeth per inch.) The smooth one works great for throwing, the toothy ones are fantastic for scoring, scraping and planing the clay. This is a good tool for sculpting and hand building. Made from high quality stainless steel, these scrapers are flexible.
$18.00 - $20.00
Sherrill Mudtools Drawing Ribs - Pebble
Love texture? We do! For years Michael has altered his metal ribs to create interesting surfaces. Sherrill's Drawing Ribs are made out of cutlery grade stainless steel. The Pebble shape is great for concave surfaces like the inside of a bowl. Drag. Hatch. Let you imagination have free reign. Have fun discovering every side of these ribs. Choose from 5 different edges: DB0 – Smooth DB1 – Organic DB2 – Wave DB3 – Angle DB4 – Angle
$13.00 - $16.00
Sherrill Mudtools Drawing Ribs - Leaf
Love texture? We do! For years Michael has altered his metal ribs to create interesting surfaces. Sherrill's Drawing Ribs are made out of cutlery grade stainless steel. The Bean shape is a perfect for bowls and cups, both inside and out. Drag. Hatch. Let you imagination have free reign. Have fun discovering every side of these ribs. Choose from 5 different edges: DB0 – Smooth DB1 – Organic DB2 – Wave DB3 – Angle DB4 – Angle
$11.00 - $13.00
Sherrill Mudtools Drawing Ribs - Bean
Love texture? We do! For years Michael has altered his metal ribs to create interesting surfaces. Sherrill's Drawing Ribs are made out of cutlery grade stainless steel. The Bean shape is a perfect for bowls and cups, both inside and out. Drag. Hatch. Let you imagination have free reign. Have fun discovering every side of these ribs. Choose from 5 different edges: DB0 – Smooth DB1 – Organic DB2 – Wave DB3 – Angle DB4 – Wave
$16.00
MKM Pottery Tools T3D Large Double-ended Throwing Tool
19.5" Long
$29.95
MKM Pottery Tools T3C Medium Double-ended Throwing Tool
13.5" Long
$26.96
MKM Pottery Tools T2 Tall Jar Tool
12" LongGreat for tall jars, glasses, narrow vases, or just reaching down into a form and doing the final adjustments to the shape.
$18.95
Kemper Tools Kemper SA10 Aluminum Scraper
Used for shaping, smoothing and trimming pottery shapes. The steel scrapers (S) are made from thin flexible spring stainless steel. The S11S and S12 are slightly heavier gauge steel, making them somewhat stiffer. The aluminum scrapers (SA) are made from a high-strength aircraft alloy that is much more rigid. The rigid scrapers can also be used as a squeegee to remove excess water from pottery shapes.
$3.99
Kemper Tools Kemper S6 Steel Scraper
Used for shaping, smoothing and trimming pottery shapes. The steel scrapers (S) are made from thin flexible spring stainless steel. The S11S and S12 are slightly heavier gauge steel, making them somewhat stiffer. The aluminum scrapers (SA) are made from a high-strength aircraft alloy that is much more rigid. The rigid scrapers can also be used as a squeegee to remove excess water from pottery shapes.
$2.90