Bracker's Good Earth Clays Bracker's 10 sided kiln Furniture kit
INCLUDES: 2 FULL shelves 2 HALF shelves 3# Kiln Wash Kiln Gloves Post Assortment (Contains 10 -1" posts, 6 - 2" Posts and 12 each of 4", 6" & 8" posts) We can also swap 2 halves for a full or vice-versa upon request at no additional charge
$480.00 - $525.00
Bracker's Good Earth Clays Bracker's 10 sided kiln Furniture kit, Hollow Core Shelves
INCLUDES: 2 - 20" Hollow Core FULL shelves 2 - 20" Hollow Core HALF shelves 3# Kiln Wash Kiln Gloves Post Assortment (Contains 10 -1" posts, 6 - 2" Posts and 12 each of 4", 6" & 8" posts) We can also swap 2 halves for a full or vice-versa upon request at no additional charge
$525.00
Bracker's Good Earth Clays Bracker's 12 sided kiln Furniture kit, Hollow Core Shelves
INCLUDES: 6 - 25.5" Hollow Core HALF shelves 3# Kiln Wash Kiln Gloves Post Assortment (Contains 10 -1" posts, 6 - 2" Posts and 12 each of 4", 6" & 8" posts)
$660.00
Bracker's Good Earth Clays Bracker's 12 sided kiln Furniture kit
INCLUDES: 1 - Solid Round High Alumina FULL shelf 4 - Solid Round High Alumina HALF shelves 5# Kiln Wash Kiln Gloves Post Assortment (Contains 10 -1" posts, 6 - 2" Posts and 12 each of 4", 6" & 8" posts) We can also swap 2 halves for a full or vice-versa upon request at no additional charge
$600.00
Bracker's Good Earth Clays Bracker's 8 sided kiln Furniture kit, Solid Shelves
INCLUDES: 3 - 15" Solid Round High Alumina FULL shelves 1 - 15" Solid Round High Alumina HALF shelves 2# Kiln Wash Kiln Gloves Post Assortment (Contains 10 -1" posts, 6 - 2" Posts and 12 each of 4", 6" & 8" posts) We can also swap 2 halves for a full or vice-versa upon request at no additional charge
$345.00
Skutt Ceramic Products Skutt Element for KM or KMT 8, 10, or 12 sided kiln (NOT PK)
Elements for all current model Skutt Kilns (8-12 sided, KM and KMT only, non PK), includes 818, 822, 1018, 1022, 1027, 1218, 1222, 1227 Kiln element stock varies wildly. If your elements are not in stock here, we will have them shipped to you from the manufacturer. Looking for elements for a different Skutt kiln? Scroll down to see other options. Check out this video of Dave showing how to pin elements.
$57.00
Skutt Ceramic Products Skutt Element for PK KILNS
Elements for all current model Skutt PK Kilns (includes 1227-3PK, 1231-3PK, 1427-3PK, and 1627-3PK) Kiln element stock varies wildly. If your elements are not in stock here, we will have them shipped to you from the manufacturer. Looking for elements for a different Skutt kiln? Scroll down to see other options. Check out this video of Dave showing how to pin elements.
$59.00
-
Skutt Ceramic Products Skutt Element for Smaller Kilns
Elements for all smaller, current model, KM or KMT Skutt kilns (includes Firebox 8x4 LT, 8x6 LT, Glazetech, 614-3, and 714) Kiln element stock varies wildly. If your elements are not in stock here, we will have them shipped to you from the manufacturer. Looking for elements for a different Skutt kiln? Scroll down to see other options. Check out this video of Dave showing how to pin elements.
$37.00
L&L Kiln Mfg. L&L Easy Fire Kiln Element
Elements for L&L Easy Fire Kilns Not all elements are in stock and may be shipped direct from the manufacturer based on their current stock and lead times.
$67.00
L&L Kiln Mfg. Furniture Kit for L&L 8 sided
DESCRIPTION Shelves: One 15" Full Round Shelf and and Four 15" Half Round Shelves (5/8" thick) Furniture Posts: Four each of 1/2", 1", 2", 4", & 6" high 1-1/2" Square Ceramic Posts Furniture Accessories: One Pair Heat Resistant Gloves
$375.00
L&L Kiln Mfg. Furniture Kit for L&L 8 sided Tall
DESCRIPTION Shelves: Two 15" Full Round Shelves and Four 15" Half Round Shelves (5/8" thick) Furniture Posts: Six each of 1/2", 1", 2", 4", 6", & 8" high 1-1/2" Square Ceramic Posts Furniture Accessories: One Pair Heat Resistant Gloves
$515.00
L&L Kiln Mfg. Furniture Kit for L&L 10 sided Tall
DESCRIPTION Shelves: Two 20" Full Round Shelves and Four 20" Half Round Shelves (3/4" thick) Furniture Posts: Six each of 1/2", 1", 2", 4", 6", & 8" high 1-1/2" Square Ceramic Posts Furniture Accessories: One Pair Heat Resistant Gloves
$650.00
L&L Kiln Mfg. Furniture Kit for L&L 10 sided
DESCRIPTION Shelves: Two 20" Full Round Shelves and Four 20" Half Round Shelves (3/4" thick) Furniture Posts: Six each of 1/2", 1", 2", 4", 6", & 8" high 1-1/2" Square Ceramic Posts Furniture Accessories: One Pair Heat Resistant Gloves
$540.00
L&L Kiln Mfg. Furniture Kit for L&L 12 sided
DESCRIPTION Shelves: Six 25-1/2" Half Round Shelves (3/4" thick) Furniture Posts: Six each of 1/2", 1", 2", 4", 6", & 8" high 1-1/2" Square Ceramic Posts Furniture Accessories: One Pair Heat Resistant Gloves
$725.00
L&L Kiln Mfg. Furniture Kit for L&L 12 sided Tall
DESCRIPTION Shelves: Eight 25-1/2" Half Round Shelves (3/4" thick) Furniture Posts: Six each of 1/2", 1", 2", 4", 6", & 8" high 1-1/2" Square Ceramic Posts Furniture Accessories: One Pair Heat Resistant Gloves
$875.00
Cone Art Kilns by Tucker's Coneart 119 with Genesis Controller
119D Overview .57 Cubic Feet 2 Years Warranty Double Insulated Wall Kanthal A-1 Elements 120 Volts 18 Amps 20 Amp Breaker Required Bartlett Controller The Tucker’s cone Art Kiln Model 119D is an excellent choice for firing small items such as dolls. This kiln is especially useful as a test kiln since it fires to cone 10 using 120-volts. It is a double insulated kiln with 2 ½” of premium firebrick plus 1″ of block insulation. This 3 ½” thick wall saves approximately 30 % in electricity costs and has a safer, cooler outside jacket. The cone 10 Kanthal A-1 elements are standard. The jacket and fittings are stainless steel. The Bartlett electronic controller is mounted on an angled easy view control panel. This kiln is available with either the standard V6-CF keypad or the new Genesis touch screen. The standard model is the BX119D. The Genesis version is GX119D. There isn’t a better-built, more convenient small test kiln on the market today than the Tucker’s Cone Art Model 119D.
$2,770.00 $2,499.00
L&L Kiln Mfg. L&L School Master Kiln
Designed for K-12 Schools with low-fire programs Works on all voltages 208-240v 3" thick Firebrick Genesis Mini Touch Screen Control - intuitive programming, comes with a free app for monitoring kiln Hard Ceramic Element Channels protect elements and fragile firebrick, improves kiln life dramatically Piggy-back Control Panel - easy & safe servicing, keeps electronics cool Ceramic Terminals make changing elements easy without crimping Protected Thermocouple - for worry-free loading Solid, Straight-View Peephole Plug - no chance of falling out Spring-Lift lid - easy to lift, no support bar restricting loading Stainless Steel Case Full Support Stand extends the life of the bottom brick 3" brick adds strength and insulation for increased energy efficiency Comes with a Five-Year Warranty! Power connection: All kilns are rated for Cone 6 but recommended for up to Cone 1 low-fire. They will work on any voltage from 208 to 240 volts. Kilns may be ordered for single-phase or three-phase. Single-phase kilns come with a 6-foot 6-50 plug. Three-phase kilns come with a 6-foot 15-50 cord.
$4,491.00
L&L Kiln Mfg. L&L Plug-n-Fire
Model PF8 Craft/Test Kiln with a Genesis Mini Touchscreen Controller 8" Square x 9" High (0.33 cu ft) This kiln can fire to Cone 10 on a standard 15-amp circuit, and draws only 12.5 amps Extra-insulated sides with 2-1/2" K23 brick and 1" of backup insulation; Top & Bottom are 3" K23 brick Kiln plugs into a separate control panel with power and thermocouple wire jack Door safety switch shuts off power to the elements when the door is opened Hard ceramic element channels Includes one 7" by 7" by 3/8" shelf and three 4" posts Not yet listed to UL499 Includes Genesis-Mini Touchscreen Control Downloadable Spec Sheet Plug-n-Fire • 1 Phase 120 V
$1,685.00 $1,555.39
Skutt Ceramic Products Skutt Firebox
Start Your Kiln Journey with Skutt’s Firebox 8×6 Mini-Kiln Attention, budding artists! You don’t need a big budget or a spacious studio to bring your ceramic dreams to life. Our Firebox 8×6 LT mini-kiln is your ticket to creative freedom. Fire ceramics, glass, metal, clay…this mini-kiln does it all with easy to use preset programs. It plugs into standard household voltage, has a UL safety listing, and includes a shelf kit and kiln wash. What more could you want? The ideal kiln for beginners. Why Choose The Skutt Firebox 8×6? Affordable Price Tag: Don’t break the bank as you get started in firing your own ceramic pieces. Compact Design Fits Anywhere: You don’t need a huge space to locate your kiln and it works with standard household voltage (no expensive wiring required). Easy For Beginners: Simple operation, plus it comes with a shelf kit and kiln wash. Endless Creative Possibilities: Along with ceramics, the Firebox can be used for fusing glass and heat treating metal. Support: Our legendary customer service and tech team is available to answer your questions via phone and email. Plus, our website features comprehensive guides and videos to help you every step of the way. Now manufactured with the Mini Touchscreen Controller! Skutt has taken things a touch more into the future for our smaller kiln models. Moving from the 3-Button Controller to the Mini Touchscreen was a no-brainer. This controller has nearly all the features of the full-sized KMT controller and is just as easy to program. Downloadable Spec Sheet: FireBox 8x6 LT • 1 Phase 115 Volts FireBox 8x4 LT • 1 Phase 115 Volts
$1,355.00
Skutt Ceramic Products Skutt Rolling Kiln Stand for Glaze Tech (Elevated)
Almost every kiln that Skutt sells comes with a stand but most of them are designed to stay put. Trying to move them with the kiln setting on them could result in a broken stand or even worse a broken kiln, or even worse, a broken you. Often times you may want to move your kiln to clean under it or just get it out of the way when it is not being used. Think how nice it would be to get that car in the garage every once in a while. Our rolling stands are constructed out of heavy duty, welded square tubing and fitted with high quality, locking steel castors ont models designed for large kilns. Steel castors will not develop flat spots if they sit too long in one spot unlike rubber or plastic wheels. They provide the recommended clearances from the kiln to the floor and many are adjustable in order to raise the loading level to a height that is comfortable for you.
$495.00 $396.00
Skutt Ceramic Products Furniture Kit for Skutt Glaze Tech Kiln
[image is representative of Skutt furniture kits in general and does not reflect the actual items in this kit]INCLUDES: 1 - 13" full shelf (5/8" thick) 1 - 6.5" x 13" half shelf (5/8" thick) 3 each - 1", 2", 3", 4", 5", and 6" posts 8 oz. kiln wash
$272.00
Skutt Ceramic Products Skutt Rolling Kiln Stand for 1427-3 PK kiln
Almost every kiln that Skutt sells comes with a stand but most of them are designed to stay put. Trying to move them with the kiln setting on them could result in a broken stand or even worse a broken kiln, or even worse, a broken you. Often times you may want to move your kiln to clean under it or just get it out of the way when it is not being used. Think how nice it would be to get that car in the garage every once in a while. Our rolling stands are constructed out of heavy duty, welded square tubing and fitted with high quality, locking steel castors ont models designed for large kilns. Steel castors will not develop flat spots if they sit too long in one spot unlike rubber or plastic wheels. They provide the recommended clearances from the kiln to the floor and many are adjustable in order to raise the loading level to a height that is comfortable for you. This stand will position your kiln base 8" above the floor and is NOT adjustable.
$545.00
Skutt Ceramic Products Skutt 1427-3 PK
The newest edition to the PK family! The Skutt 1427PK Oval kiln has a 40" x 23" interior and is 27" inches deep. The chamber size is 12.75 cubic feet. This high-capacity Cone 10 kiln is ideal for sculpture artists and production potters working from home. Available in 1PH, it can be installed in most residential buildings. Like all of our Production Kiln (PK) models, it incorporates solid-state relays, busbar element connectors, and heavy-duty wiring. It also features Zone Control, dual lid braces, and a standard lid lifter. Additionally, it is available with the Kilnmaster controller. Downloadable Spec Sheets: (KM or KMT) 1427PK • 1 Phase 240 Volts 1427PK • 1 Phase 208 Volts 1427PK • 3 Phase 240 Volts 1427PK • 3 Phase 208 Volts
$7,850.00 - $8,235.00
Skutt Ceramic Products Furniture Kit for Skutt KM1427-3PK
[image is representative of Skutt furniture kits in general and does not reflect the actual items in this kit]INCLUDES: 8 - 22 x 13" (1027) half shelves (3/4" thick) 4 - 21 x 17.5"" rectangle shelves (3/4” thick) 1 1427 Post Assortment includes (12) each of 1” thru 6” post lengths 8 oz. kiln wash
$1,300.00 $1,114.29
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"