These ribs are made from smooth-finished hardwood, and employ the basic shapes required for opening, shaping, curving, smoothing and trimming wet clay on the potter’s wheel.
These ribs are made from smooth-finished hardwood, and employ the basic shapes required for opening, shaping, curving, smoothing and trimming wet clay on the potter’s wheel.
These ribs are made from smooth-finished hardwood, and employ the basic shapes required for opening, shaping, curving, smoothing and trimming wet clay on the potter’s wheel.
These ribs are made from smooth-finished hardwood, and employ the basic shapes required for opening, shaping, curving, smoothing and trimming wet clay on the potter’s wheel.
Used for light cutting, slicing and shaping, these 6" double-ended ribbon tools come in a wide variety of shapes. The ends are formed from high-carbon heat-treated steel and are firmly attached to hardwood handles.
Used for light cutting, slicing and shaping, these 6" double-ended ribbon tools come in a wide variety of shapes. The ends are formed from high-carbon heat-treated steel and are firmly attached to hardwood handles.
Quality tools of finest stainless steel and select, smooth hardwood. Made in the USA since 1947. Perfect for the beginning potter, in or out of the classroom. These tools work well for sculpting, hand building, or throwing on the wheel. Used by schools and universities around the world, this 8-piece kit is packaged in a reusable, clear vinyl bag with pockets to keep your tools together for travel or storage. Kit contains one each: Loop Tool (LT5) 8" Ribbon Tool (8R2) Wood Potter's Rib (RB2) Pro Needle Tool (PRO) 8" Wood Modeling Tool (WT6) Throwing Sponge (SPR) Steel Scraper (S4) Wire Clay Cutter (K35)
Used to cut heavy clay strips, designs, and holes, this tool is used with many art mediums for a wide variety of uses - too many to name! This 6-5/8" long tool has a sharp steel needle and is firmly set in a textured aluminum handle providing a firm grip for wet hands.
Cut through and remove the uneven top edge of wheel- thrown items. The large 1-15/16" (49mm) long, sharp, heat-treated steel needle is set in a 1/2" diameter hard- wood handle for a sturdy grip.
A necessity for all potters, this 1-15/16" long, thin heat-treated steel needle makes a clean smooth cut with a minimum of drag when removing the uneven top edge of thrown items.
Just the answer for your fine sculpting, detailing and trimming requirements. These miniature sculpting tools are made of fine ribbon steel, heat treated for maximum strength. Firmly set in 1/4” diameter by 5” aluminum handle, these tools are ideal for working with clay, greenware, wax, plaster, modeling mediums, and even bread dough. Available as a set, (MRS) or individually.
Just the answer for your fine sculpting, detailing and trimming requirements. These miniature sculpting tools are made of fine ribbon steel, heat treated for maximum strength. Firmly set in 1/4” diameter by 5” aluminum handle, these tools are ideal for working with clay, greenware, wax, plaster, modeling mediums, and even bread dough. Available as a set, (MRS) or individually.
Just the answer for your fine sculpting, detailing and trimming requirements. These miniature sculpting tools are made of fine ribbon steel, heat treated for maximum strength. Firmly set in 1/4” diameter by 5” aluminum handle, these tools are ideal for working with clay, greenware, wax, plaster, modeling mediums, and even bread dough. Available as a set, (MRS) or individually.
Just the answer for your fine sculpting, detailing and trimming requirements. These miniature sculpting tools are made of fine ribbon steel, heat treated for maximum strength. Firmly set in 1/4” diameter by 5” aluminum handle, these tools are ideal for working with clay, greenware, wax, plaster, modeling mediums, and even bread dough. Available as a set, (MRS) or individually.
Just the answer for your fine sculpting, detailing and trimming requirements. These miniature sculpting tools are made of fine ribbon steel, heat treated for maximum strength. Firmly set in 1/4” diameter by 5” aluminum handle, these tools are ideal for working with clay, greenware, wax, plaster, modeling mediums, and even bread dough. Available as a set, (MRS) or individually.
Just the answer for your fine sculpting, detailing and trimming requirements. These miniature sculpting tools are made of fine ribbon steel, heat treated for maximum strength. Firmly set in 1/4” diameter by 5” aluminum handle, these tools are ideal for working with clay, greenware, wax, plaster, modeling mediums, and even bread dough. Available as a set, (MRS) or individually.
Just the answer for your fine sculpting, detailing and trimming requirements. These miniature sculpting tools are made of fine ribbon steel, heat treated for maximum strength. Firmly set in 1/4” diameter by 5” aluminum handle, these tools are ideal for working with clay, greenware, wax, plaster, modeling mediums, and even bread dough. Available as a set, (MRS) or individually.
Used to remove controlled amounts of clay from wheel-thrown and sculpture pieces. The shaped cutting heads are made from heavy stainless steel ribbon with sharpened edges. Each tool, with its rugged hardwood handle, ensures a sure grip and easy manipulation in wet clay.
Used to remove controlled amounts of clay from wheel-thrown and sculpture pieces. The shaped cutting heads are made from heavy stainless steel ribbon with sharpened edges. Each tool, with its rugged hardwood handle, ensures a sure grip and easy manipulation in wet clay.
Used to remove controlled amounts of clay from wheel-thrown and sculpture pieces. The shaped cutting heads are made from heavy stainless steel ribbon with sharpened edges. Each tool, with its rugged hardwood handle, ensures a sure grip and easy manipulation in wet clay.
Used to remove controlled amounts of clay from wheel-thrown and sculpture pieces. The shaped cutting heads are made from heavy stainless steel ribbon with sharpened edges. Each tool, with its rugged hardwood handle, ensures a sure grip and easy manipulation in wet clay.
Designed for medium duty pottery and sculpture work, these 7" long tools have sharpened stainless steel beveled ribbon ends attached to hardwood handles.
This tool has heavier handles and thicker, 36" long wire for cutting and trimming large bodies of clay. Comes in a heat sealed polybag. The more common cut-off wire is the K-35 cut-off wire.
Ideal for slicing and cutting lump clay, as well as trimming pots and other projects on the wheel. Hardwood 3" toggle handles are firmly fastened to approximately 18" of wire/line. The K35 wire is quality stainless steel while a high-strength braided nylon cord is used for the K36.
These special blades will cut in any direction that pressure is applied. The high carbon steel saw is firmly set into a hardwood handle for a total length of 5-3/8". The K32 is a heavy duty saw used for cutting out designs in thick-walled greenware.
These tools present a variety of shapes and sizes of blades to accommodate the ordinary as well as the intricate cleanup job. All blades are made from high quality stainless steel with a double edge keenly sharpened.
These tools present a variety of shapes and sizes of blades to accommodate the ordinary as well as the intricate cleanup job. All blades are made from high quality stainless steel with a double edge keenly sharpened.
Used for cutting, slicing, smoothing, contouring and pattern decorating in soft clay. These smooth handcrafted modeling tools are made from the finest quality boxwood.
Fine bristles that provide the right degree of stiffness for the short stroke texture techniques used to apply textures to small hard-to-get-at areas. The stainless steel bristles are firmly set in a firm grip, textured aluminum handle for a total length of 5".
Used for smoothing, shaping and finishing pottery pieces. Molded from pliable rubber. We offer them in two kidney shapes and dif- ferent grades of resiliency. FRH = Hard 4-14" FRSM = Hard 3-1/8" FRSO = Soft 4-1/4" FRSS = Soft 3-1/8"
Used for smoothing, shaping and finishing pottery pieces. Molded from pliable rubber. We offer them in two kidney shapes and dif- ferent grades of resiliency. FRH = Hard 4-14" FRSM = Hard 3-1/8" FRSO = Soft 4-1/4" FRSS = Soft 3-1/8"
Used for smoothing, shaping and finishing pottery pieces. Molded from pliable rubber. We offer them in two kidney shapes and dif- ferent grades of resiliency. FRH = Hard 4-14" FRSM = Hard 3-1/8" FRSO = Soft 4-1/4" FRSS = Soft 3-1/8"
Used to trim pour hole waste, remove mold marks, carve and sculpt ceramics and greenware. F97 has a hard tempered steel blade with the same "springy" feel as most conventional blades. The F96 is a softer steel blade, with much more flexibility which allows it to bend. Both blades are 4" long and firmly set in a hardwood handle for a total length of 8".
Used to trim pour hole waste, remove mold marks, carve and sculpt ceramics and greenware. F97 has a hard tempered steel blade with the same "springy" feel as most conventional blades. The F96 is a softer steel blade, with much more flexibility which allows it to bend. Both blades are 4" long and firmly set in a hardwood handle for a total length of 8".
Designed for that flawless glaze look. The four sharp gripping points on this tool make minimal contact with the piece being dipped, which allows the glaze to fill in and extinguish those tattletale marks. These 10" tongs are made from heavy plated steel and have dipped plastic handles to provide a good grip. They are capable of handling various size and shaped items.
The stiff, course bristles are designed for use on hard greenware. The brush is made with stainless steel wires firmly set in a hardwood handle for a total length of 6-1/2".
