NOTE: The wax resist is colored with a pink or purple tint (that burns out completely), but the actual shade varies by batch. Recently we were sent a sample of the Mr. Mark’s Wax On. We enjoyed testing this wax resist and found it to be excellent for precision application on bisque fired ware. The light purple color, which completely burns out, makes it easy to see as you are applying it. The wax brushes on smoothly and dries quickly – about 5 minutes! The special hardening agent in this wax also ensures that any glaze that drips over onto the wax will wipe off easily with a wet sponge. Mr. Mark’s Wax On also works exceptionally well for the “Wax and Wipe” technique on leather-hard or bone dry clay. Apply the wax directly onto your un-bisque fired piece, (I tested it on both a fresh slab and on a bone dry piece), allow it to dry, then use a sponge to remove the clay from the bare places. The wax seals over the clay underneath it, leaving those areas raised. After bisque-firing, you’re left with a nice embossed (or debossed) texture. Mr. Marks’ Wax ON is a wax resist product that contains a special hardener that quickly sets the wax. It was created to eliminate problematic dripping and tacky surfaces when applying wax. Now you can decorate with wax during glazing without worrying about pesky smudges and sticky fingers. It is ideal for creating detailed, precise surface decoration on bisqueware and can be applied with either a brush or slip applicator. The pink/purple color allows you to easily visualize where wax is applied. However, the color burns out in the firing, just like regular wax. Wax ON should be stored at room temperature and mixed well before use. Brushes and tools used for application of Wax ON should be washed after use.

Read more less

Mr. Mark's Removable Wax Off Resist is a wax we have created for potters and decorative artists. It is designed to be painted on like regular wax, but can easily be peeled away. The removal is simple and can be done in a short period of time. This allows for endless possibilities in design as well as layering. Our Wax Off! Resist drys in 5-10 minutes depending on how thick you put it on. It drys darker than it appears when wet (so you know when it's ready). It can even be applied to spots on your bisque ware that have already been dipped in glaze without lifting away the glaze. On top of all that it's affordable! You will never have to be afraid of dripping wax on your pots and being stuck with a waxing mistake again: now you can just peel it away! Helpful Hint: By resting your brush in soapy water while you are working with Wax Off, you will preserve the life of your brush. Clean your brushes with soap and water after use. Dish soap works great. There are no commercial preservatives in this product to prevent it from freezing. If your area of the world is freezing this product when exposed may harden. There are no refunds if this happens. Please be aware of your local weather.

Read more less

Water based wax emulsion used for glaze decorating. Glaze will be resisted where wax is applied. Dries quickly on bisque and in a consistency favorable to brush work. Please Note: The Wax will FREEZE in cold climates and will not resist effectively. If the wax has frozen, it will get lumpy and separate. Wax Resist will be sent to cold regions in the winter only at the customer's risk.

Read more less

Xiem's foam brush is made from the highest quality foam and is secured on a plastic handle for wax-resist application on pottery. It is also excellent for oxides, stains, inks, and glazes in hard to reach ares. Small: .25" wide X4" long Medium: .5" wide by .4.8" long Large: .6" wide X 5" long Available in 10 packs or 20 packs

Read more less

Aftosa Wax Resist is used to resist glazes. It should be thinned with water to suit the potter's use. The wax is applied to the base and rims of the pieces before glazing. Allow the wax three to four hours to dry before glazing (some clean up with a sponge may be required) or before adding a second coat. Aftosa Wax Resist is also excellent for use in decorating pottery. Although Aftosa Wax Resist is tinted green so it is easy to see while you are working with it, the Wax Resist fires clear and the Black Wax Resist leaves a black line after being fired. The wax has a shelf life of 2-3 years. If used improperly, it can become contaminated. Always keep the lid tight on the original container. Pour a small amount in a separate container, use as desired, and dispose of the excess. Do NOT pour wax back into the original container. If the wax has a strong, sour odor, it has been contaminated. Clean up is easy with warm, soapy water. Please Note: The Wax will FREEZE in cold climates and will not resist effectively. If the wax has frozen, it will get lumpy and separate. Wax Resist will be sent to cold regions in the winter only at the customer's risk.

Read more less

Aftosa Wax Resist is used to resist glazes. It should be thinned with water to suit the potter's use. The wax is applied to the base and rims of the pieces before glazing. Allow the wax three to four hours to dry before glazing (some clean up with a sponge may be required) or before adding a second coat. Aftosa Wax Resist is also excellent for use in decorating pottery. Although Aftosa Wax Resist is tinted green so it is easy to see while you are working with it, the Wax Resist fires clear and the Black Wax Resist leaves a black line after being fired. The wax has a shelf life of 2-3 years. If used improperly, it can become contaminated. Always keep the lid tight on the original container. Pour a small amount in a separate container, use as desired, and dispose of the excess. Do NOT pour wax back into the original container. If the wax has a strong, sour odor, it has been contaminated. Clean up is easy with warm, soapy water. 1. Trail or brush Black Wax Resist in desired pattern and allow to dry a minimum of 2 hours. 2. Apply glaze or slip by dipping or brushing. 3. Fire (cone 06-8). Results may vary - please test first. Please Note: The Wax will FREEZE in cold climates and will not resist effectively. If the wax has frozen, it will get lumpy and separate. Wax Resist will be sent to cold regions in the winter only at the customer's risk.

Read more less

Xiem double-sided and washable Sanding Sticks are made from aluminum oxide grit on a firm backing. No sanding block is needed. They’re perfect for sanding, shaping, refining, and finishing a variety of surfaces and materials such as woods, plastics, acrylics, alabasters, and ceramics—green wares and bisque wares. Available in a pack of two for fine, medium, or coarse grit. Size 1.25 “W x 7”L Available in a pack of two for fine, medium, and coarse grit.

Read more less

CSI Turntables are made of two plastic laminate covered particle boards (plastic laminate design will vary from one to the other) with a stainless steel ball bearing, screwed into the inside surfaces of the boards. The 8" & 10" turntables have a 4" bearing capable of supporting at least 200# and the 12", 14" & 16" have a 6" bearing capable of supporting at least 300#. To clean, wipe with a damp sponge (do not submerge the turntable in water).

Read more less

CSI Turntables are made of two plastic laminate covered particle boards (plastic laminate design will vary from one to the other) with a stainless steel ball bearing, screwed into the inside surfaces of the boards. The 8" & 10" turntables have a 4" bearing capable of supporting at least 200# and the 12", 14" & 16" have a 6" bearing capable of supporting at least 300#. To clean, wipe with a damp sponge (do not submerge the turntable in water).

Read more less

CSI Turntables are made of two plastic laminate covered particle boards (plastic laminate design will vary from one to the other) with a stainless steel ball bearing, screwed into the inside surfaces of the boards. The 8" & 10" turntables have a 4" bearing capable of supporting at least 200# and the 12", 14" & 16" have a 6" bearing capable of supporting at least 300#. To clean, wipe with a damp sponge (do not submerge the turntable in water).

Read more less

SHIMPO’s banding wheels are used for decorating, sculpting, carving and hand building. Designed to provide reliably smooth and even rotation for the most delicate applications. It's no wonder they are the banding wheel of choice for studio artists, production potters and classrooms alike. In five different models, we offer a selection of wheel-head diameters and heights. Banding Wheels Solid Cast-iron Construction Heavy-duty construction ensures many years of use and will hold a spin and stay in place as needed Sealed Ball Bearings Extra smooth and even rotation (no wobbling or sticking) One-piece Design Will not come apart when lifted Top Grade Paint Coating Rust-resistant Warranty 1-year Model BW-30M BW-25H BW-25L BW-22L BW-18L Diameter 11 ¾" 9 7/8" 9 7/8" 8 ¾" 7" Height 4 ¾" 7 ½ 2 ¼" 2 ¼" 2 ¼" Ship Weight 28 lbs. 19 lbs. 15 lbs. 13 lbs. 6.50 lbs.

Read more less

An empty pint jar with lid. Perfect for storage of glazes, slips, and other liquids or materials. All-purpose straight-sided jars for storing and portioning glaze materials. Translucent for product visibility. Wide mouth for easy filling and pouring. Chemical and impact-resistant polypropylene. FDA compliant. Caps included.

Read more less

An empty 4 ounce jar with lid. Perfect for storage of glazes, slips, and other liquids or materials. All-purpose straight-sided jars for storing and portioning glaze materials. Translucent for product visibility. Wide mouth for easy filling and pouring. Chemical and impact-resistant polypropylene. FDA compliant. Caps included.

Read more less

An empty 2 ounce jar with lid. Perfect for storage of glazes, slips, and other liquids or materials. All-purpose straight-sided jars for storing and portioning glaze materials. Translucent for product visibility. Wide mouth for easy filling and pouring. Chemical and impact-resistant polypropylene. FDA compliant. Caps included.

Read more less

Heavy duty plastic bag suitable for 25# of moist clay - this is the bag we use for all of the Flint Hills moist clay bodies. (clay not included)

Read more less