The Xiem retractable scoring tool provides an ergonomic solution to scoring and storing. The 6 sharp tines ensure depth and precision of scoring marks with little pressure but are efficiently retracted back into the plastic sheath for safety when not in use.
Used to make cutout designs in greenware, this tool is best suited for straight lines. The carbide steel saw is firmly set into a hardwood handle for a total length of 5 3/8".
One of Chris Burke's top 5 favorites!Everyone wants this scalpel. It's lightweight, easy to use, and surgically sharp! Don't let the low price and disposable look fool you, our customers tell us that these wonderful little knives last much longer than expected.
An extremely useful combination tool. One end is a soft brush which is ideal for removing loose particles when dusting the greenware before firing. The heat-treated spring steel knife can be used for detailing and lifting fine bird feathers, flower petals and fish scales just to name a few. It also makes an excellent sgraffito tool. The total length is 6-5/8".
This tool makes the right size hole in greenware salt and pepper shakers. Double-ended, it has high carbon steel drills firmly set in a hardwood handle for a total length of 6 3/4".
Provide an easy method for cutting clean holes in wet thick-wall greenware and wet clay. All five sizes can be used to achieve a variety of designs. All of these hole cutters have sharp, polished brass, cutting tubes with the smaller sizes firmly set in hardwood handles. The two larger tubes have ends covered with a rubber cap for comfort.
Provide an easy method for cutting clean holes in wet thick-wall greenware and wet clay. All five sizes can be used to achieve a variety of designs. All of these hole cutters have sharp, polished brass, cutting tubes with the smaller sizes firmly set in hardwood handles. The two larger tubes have ends covered with a rubber cap for comfort.
HC1 = 3/16" diameter x 5-3/4" long
HC1A = 1/4" diameter x 5-3/8" long
HC2 = 5/16" diameter x 5" long
HC3 = 1/2" diameter x 6-1/2" long
HC4 = 7/8" diameter x 6-1/2" long
Provide an easy method for cutting clean holes in wet thick-wall greenware and wet clay. All five sizes can be used to achieve a variety of designs. All of these hole cutters have sharp, polished brass, cutting tubes with the smaller sizes firmly set in hardwood handles. The two larger tubes have ends covered with a rubber cap for comfort.
HC1 = 3/16" diameter x 5-3/4" long
HC1A = 1/4" diameter x 5-3/8" long
HC2 = 5/16" diameter x 5" long
HC3 = 1/2" diameter x 6-1/2" long
HC4 = 7/8" diameter x 6-1/2" long
Provide an easy method for cutting clean holes in wet thick-wall greenware and wet clay. All five sizes can be used to achieve a variety of designs. All of these hole cutters have sharp, polished brass, cutting tubes with the smaller sizes firmly set in hardwood handles. The two larger tubes have ends covered with a rubber cap for comfort.
HC1 = 3/16" diameter x 5-3/4" long
HC1A = 1/4" diameter x 5-3/8" long
HC2 = 5/16" diameter x 5" long
HC3 = 1/2" diameter x 6-1/2" long
HC4 = 7/8" diameter x 6-1/2" long
Provide an easy method for cutting clean holes in wet thick-wall greenware and wet clay. All five sizes can be used to achieve a variety of designs. All of these hole cutters have sharp, polished brass, cutting tubes with the smaller sizes firmly set in hardwood handles. The two larger tubes have ends covered with a rubber cap for comfort.
HC1 = 3/16" diameter x 5-3/4" long
HC1A = 1/4" diameter x 5-3/8" long
HC2 = 5/16" diameter x 5" long
HC3 = 1/2" diameter x 6-1/2" long
HC4 = 7/8" diameter x 6-1/2" long
Ideal for cutting out windows. These cutters are de- signed with push out plungers to remove clay from tube. Made of high quality brass with rubbertips on the plunger for comfort.
HCS1 (red capped) = 3/32" diameter
HCS2 (blue capped) = 1/8" diameter
HCS3 (yellow capped) = 3/16" diameter
HCS4 (black capped) = 1/4" diameter
Ideal for cutting out windows. These cutters are de- signed with push out plungers to remove clay from tube. Made of high quality brass with rubbertips on the plunger for comfort.
HCS1 = 3/32" diameter
HCS2 = 1/8" diameter
HCS3 = 3/16" diameter
HCS4 = 1/4" diameter
Ideal for cutting out windows. These cutters are de- signed with push out plungers to remove clay from tube. Made of high quality brass with rubbertips on the plunger for comfort. HCS1 = 3/32" diameter HCS2 = 1/8" diameter HCS3 = 3/16" diameter HCS4 = 1/4" diameter
Ideal for cutting out windows. These cutters are de- signed with push out plungers to remove clay from tube. Made of high quality brass with rubbertips on the plunger for comfort.
HCS1 = 3/32" diameter
HCS2 = 1/8" diameter
HCS3 = 3/16" diameter
HCS4 = 1/4" diameter
When drawn through a slab of clay, these tools form perfectly shaped strips that can be readily cut to length and attached to ceramic vessels as handles. These special inside taper on the cutters compresses the clay as it is cut, impart- ing a smooth finish to the clay handle. These tools are made with stainless steel ends that are firmly set in smooth hardwood handles. (HM1 = 1" Pitcher and HM2 = 3/4" Mug)
When drawn through a slab of clay, these tools form perfectly shaped strips that can be readily cut to length and attached to ceramic vessels as handles. These special inside taper on the cutters compresses the clay as it is cut, impart- ing a smooth finish to the clay handle. These tools are made with stainless steel ends that are firmly set in smooth hardwood handles. (HM1 = 1" Pitcher and HM2 = 3/4" Mug)
These cutters work just like a cookiecutter with a pusher-outer! This set includes triangles in the following diameters: 3/4", 5/8", 1/2", 7/16", and 3/8"
Make leaves for trees, flowers and fun. Made of rust-free material, these cutters have plungers to push clay out and range from approximately 1" to 2" in length.
Perfect roses every time with this set of five round cutters and instructions. Use our flower Clay Roller to roll out your clay to the desired thickness, then cut out the petals (circles). Following the instruction guide, you can hand-form the flower or use our Petal Cupper Set (FPC1) to shape your rose. Use the Flower Stick to roll the edges of your petals over. These cutters are made from rust-free materials and have ejection plungers. They range in sizes from 1/2" diameter to 1 1/2" diameter
X-Bevel is a clay tool that is designed for a quick and precise cutting of clay at 45, 30 and 60-degree angles. It is a must-have hand-building tool for all potters.
PRO Scratch Pen with Interchangeable Tips (Double-End)
PRO Scratch Pen is an excellent and useful tool for incising and excising a design directly on leather-hard clay works. The double-end interchangeable wire tips are made of high-strength stainless steel wire for long-lasting performance while the soft silicone handle to provide artists an ultimate comfort experience and a pleasure to work.
Please note: The tips on the regular Scratch Pen Tools will not work with this PRO version.
PRO Scratch Pen Wire Tips Replacement (2)
The wire-tip tools are made of high-strength stainless steel for long-lasting performance.
Please note: The tips will only fit with the scratch pen and not the regular version.
